Difference between revisions of "Manual:IP/TFTP"

From MikroTik Wiki
Jump to: navigation, search
(TFTP)
Line 1: Line 1:
==TFTP==
+
==Summary==
  
 
TFTP is a very simple protocol used to transfer files.  It is from this that its name comes, Trivial File Transfer Protocol or TFTP.  Each nonterminal packet is acknowledged separately. RouterOS has a built-in TFTP server since v3.22
 
TFTP is a very simple protocol used to transfer files.  It is from this that its name comes, Trivial File Transfer Protocol or TFTP.  Each nonterminal packet is acknowledged separately. RouterOS has a built-in TFTP server since v3.22
 +
 +
==/ip tftp==
  
 
* '''ip-address''' ''(required)'' - range of IP addresses accepted as clients
 
* '''ip-address''' ''(required)'' - range of IP addresses accepted as clients
Line 11: Line 13:
  
 
[[Image:2009-04-03 1314.png]]
 
[[Image:2009-04-03 1314.png]]
 
 
  
 
== Examples ==
 
== Examples ==

Revision as of 16:20, 3 April 2009

Summary

TFTP is a very simple protocol used to transfer files. It is from this that its name comes, Trivial File Transfer Protocol or TFTP. Each nonterminal packet is acknowledged separately. RouterOS has a built-in TFTP server since v3.22

/ip tftp

  • ip-address (required) - range of IP addresses accepted as clients
  • req-filename - requested filename as regular expression (regex)
  • real-filename - if above two values are set and valid, the requested filename will be replaced with this. If this field is empty, the req-filename will be used. If multiple regex are specified in req-filename, with this field you can set which ones should match, so this rule is validated. real-filename format for using multiple regex is filename\0\5\6
  • allow (default: yes) - to allow connection if above fields are set. if no, connection will be interrupted
  • read-only (default: no) - sets if file can be written to, if set to "no" write attempt will fail with error
  • hits - how many times this configuration entry has been executed (viewable only)

2009-04-03 1314.png

Examples

  • example 1 if file is requested return file from store called sata1:
/ip tftp add req-filename=file.txt real-filename=/sata1/file.txt allow=yes read-only=yes
  • example 2 if we want to give out one precise file no matter what user is requesting:
/ip tftp add req-filename=* real-filename=/sata1/file.txt allow=yes read-only=yes