The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Summary
Sub-menu: /ipv6 firewall filter
Properties
| Property |
Description |
| action (accept | add-dst-to-address-list | ...; Default: accept) |
Action to take if packet is matched by the rule:
- accept - Accept the packet. It is not passed to the next firewall rule.
- add-dst-to-address-list - Add destination address to address list specified by
address-list parameter
- add-src-to-address-list - Add source address to address list specified by
address-list parameter
- drop -Silently drop the packet.
- jump - Jump to the user defined chain specified by the value of
jump-target parameter
- log - Add a message to the system log containing following data: in-interface, out-interface, src-mac, protocol, src-ip:port->dst-ip:port and length of the packet. After packet is matched it is passed to the next rule in the list, similar as
passthrough
- passthrough - Ignore this rule and go to next one (useful for statistics).
- reject - Drop the packet and send an ICMP reject message
- return - Passes control back to the chain from where the jump took place.
|
| address-list (; Default: ) |
|
| time (; Default: ) |
|
[ Top | Back to Content ]
