Manual:Interface/Lora

From MikroTik Wiki
< Manual:Interface
Revision as of 11:00, 25 September 2019 by Girts (talk | contribs)
Jump to: navigation, search

Summary

Package: system,lora

Every RouterBOARD with a miniPCI-e interface (with connected USB lines) could be turn in LoRaWAN gateway by installation of R11e-LoRa8 or R11e-LoRa9 card.

Icon-warn.png

Warning: RouterOS doesn`t support 3rd party LoRaWAN gateway cards


Properties

Sub-menu: /lora

==Channels==
Property Description
antenna-gain (integer [-128..127]; Default: 0) Antenna gain in dBi.
channel-plan (as-923 | au-915 | custom | eu-868 | in-865 | kr-920 | ru-864 | us-915; Default: eu-868) Frequency plans for various regions.
disabled (yes | no; Default: yes) Whether LoRaWAN gateway is disabled.
forward (crc-disabled | crc-error | crc-valid; Default: crc-valid,crc-error) Defines what kind of packets should be forwarded to Network server:
  • crc-disabled - forward packets which CRC code isn`t checked
  • crc-error - forward packets with incorrect CRC code
  • crc-valid - forward valid packets with correct CRC.
lbt-enabled (yes | no; Default: no) Whether gateway should use LBT (Listen Before Talk) protocol.
listen-time (integer [0us..4294967295us]; Default: 5000us) Time in microseconds to track RSSI before TX (used when lbt-enabled=yes).
name (string; Default: ) Name of LoRaWAN gateway.
network (private | public; Default: public) Whether sync word should be used (network=private) or shouldn`t (network=public).
rssi-threshold (integer [-32,768 .. 32,767]; Default: -65dB) RSSI value to determine whether forwarder may use specific channel to talk. If RSSI value is below rssi-threshold, channel could be used (used when lbt-enabled=yes).
servers (list of string; Default: ) Name or names of servers from /lora servers.
src-address (IP; Default: ) Specifies uplink packet source address if necessary (address should match an address configured on the RB).