Difference between revisions of "Manual:Interface/Lora"
From MikroTik Wiki
Line 3: | Line 3: | ||
<b>Package:</b> <code>system</code>,<code>lora</code> | <b>Package:</b> <code>system</code>,<code>lora</code> | ||
</p> | </p> | ||
− | <p>Every RouterBOARD with a miniPCI-e interface | + | <p>Every RouterBOARD with a miniPCI-e interface which supports LTE modems could also be turn in LoRaWAN gateway by installation of <b>R11e-LoRa8</b> or <b>R11e-LoRa9</b> card. </p> |
{{Warning | RouterOS doesn`t support 3rd party LoRaWAN gateway cards}} | {{Warning | RouterOS doesn`t support 3rd party LoRaWAN gateway cards}} | ||
Line 99: | Line 99: | ||
==Channels== | ==Channels== | ||
+ | |||
+ | <p id="shbox"> | ||
+ | <b>Sub-menu:</b> <code>/lora channels</code> | ||
+ | </p> | ||
+ | |||
+ | {{Mr-arg-table-h | ||
+ | |prop=Property | ||
+ | |desc=Description | ||
+ | }} | ||
+ | |||
+ | {{Mr-arg-table | ||
+ | |arg=bandwidth | ||
+ | |type=7.8_kHz {{!}} 15.6_kHz {{!}} 31.2_kHz {{!}} 62.5_kHz {{!}} 125_kHz {{!}} 250_kHz {{!}} 500_kHz | ||
+ | |default=125_kHz | ||
+ | |desc=Bandwidth of specific channel, pre-defined when any of channel-plan preset is used, but could be manually changed when channel-plan is set to custom. | ||
+ | }} | ||
+ | |||
+ | {{Mr-arg-table | ||
+ | |arg=disabled | ||
+ | |type= yes {{!}} no | ||
+ | |default=no | ||
+ | |desc=Whether specific channel is disabled. | ||
+ | }} | ||
+ | |||
+ | {{Mr-arg-table | ||
+ | |arg=freq-off | ||
+ | |type=integer [Hz] | ||
+ | |default= | ||
+ | |desc=Channel frequency offset against radio central frequency, it makes possible to adjust channel frequencies so that channels doesn`t overlap. | ||
+ | }} | ||
+ | |||
+ | {{Mr-arg-table | ||
+ | |arg=radio | ||
+ | |type= radio0 {{!}} radio1 | ||
+ | |default= | ||
+ | |desc=Defines which radio uses selected channel. | ||
+ | }} | ||
+ | |||
+ | {{Mr-arg-table-end | ||
+ | |arg=spread-factor | ||
+ | |type=SF7 {{!}} SF8 {{!}} SF9 {{!}} SF10 {{!}} SF11 {{!}} SF12 | ||
+ | |default= | ||
+ | |desc=Defines the Spread Factor for a channel with type=LoRa. Lower Spread Factor means higher data rate. | ||
+ | }} | ||
+ | |||
+ | |||
+ | ==Radios== | ||
+ | |||
+ | <p id="shbox"> | ||
+ | <b>Sub-menu:</b> <code>/lora radios</code> | ||
+ | </p> | ||
+ | |||
+ | {{Mr-arg-table-h | ||
+ | |prop=Property | ||
+ | |desc=Description | ||
+ | }} | ||
+ | |||
+ | {{Mr-arg-table | ||
+ | |arg=center-freq | ||
+ | |type=integer [0..4294967295Hz] | ||
+ | |default= | ||
+ | |desc=Defines radio central frequency, default value depends on selected channel-plan. | ||
+ | }} | ||
+ | |||
+ | {{Mr-arg-table | ||
+ | |arg=disabled | ||
+ | |type= yes {{!}} no | ||
+ | |default=no | ||
+ | |desc=Whether radio is disabled. | ||
+ | }} | ||
+ | |||
+ | {{Mr-arg-table | ||
+ | |arg=rssi-off | ||
+ | |type=integer | ||
+ | |default=-162 | ||
+ | |desc=Used to calculate precise RSSI level of received packets | ||
+ | }} | ||
+ | |||
+ | {{Mr-arg-table | ||
+ | |arg=tx-enabled | ||
+ | |type= yes {{!}} no | ||
+ | |default= | ||
+ | |desc=Whether radio is used for transmission. By default one of radios has set tx-enabled=yes and the other has set tx-enabled=no. | ||
+ | }} | ||
+ | |||
+ | {{Mr-arg-table | ||
+ | |arg=tx-freq-min | ||
+ | |type=integer [0..4294967295Hz] | ||
+ | |default= | ||
+ | |desc= | ||
+ | }} | ||
+ | |||
+ | {{Mr-arg-table-end | ||
+ | |arg=tx-freq-max | ||
+ | |type=integer [0..4294967295Hz] | ||
+ | |default= | ||
+ | |desc= | ||
+ | }} | ||
+ | |||
+ | |||
+ | ==Servers== | ||
+ | |||
+ | <p id="shbox"> | ||
+ | <b>Sub-menu:</b> <code>/lora servers</code> | ||
+ | </p> |
Revision as of 13:41, 26 September 2019
Contents
Summary
Package: system
,lora
Every RouterBOARD with a miniPCI-e interface which supports LTE modems could also be turn in LoRaWAN gateway by installation of R11e-LoRa8 or R11e-LoRa9 card.
Properties
Sub-menu: /lora
Property | Description |
---|---|
antenna-gain (integer [-128..127]; Default: 0) | Antenna gain in dBi. |
channel-plan (as-923 | au-915 | custom | eu-868 | in-865 | kr-920 | ru-864 | us-915; Default: eu-868) | Frequency plans for various regions. |
disabled (yes | no; Default: yes) | Whether LoRaWAN gateway is disabled. |
forward (crc-disabled | crc-error | crc-valid; Default: crc-valid,crc-error) | Defines what kind of packets should be forwarded to Network server:
|
lbt-enabled (yes | no; Default: no) | Whether gateway should use LBT (Listen Before Talk) protocol. |
listen-time (integer [0us..4294967295us]; Default: 5000us) | Time in microseconds to track RSSI before TX (used when lbt-enabled=yes). |
name (string; Default: ) | Name of LoRaWAN gateway. |
network (private | public; Default: public) | Whether sync word should be used (network=private) or shouldn`t (network=public). |
rssi-threshold (integer [-32,768 .. 32,767]; Default: -65dB) | RSSI value to determine whether forwarder may use specific channel to talk. If RSSI value is below rssi-threshold, channel could be used (used when lbt-enabled=yes). |
servers (list of string; Default: ) | Name or names of servers from /lora servers. |
src-address (IP; Default: ) | Specifies uplink packet source address if necessary (address should match an address configured on the RB). |
Channels
Sub-menu: /lora channels
Property | Description |
---|---|
bandwidth (7.8_kHz | 15.6_kHz | 31.2_kHz | 62.5_kHz | 125_kHz | 250_kHz | 500_kHz; Default: 125_kHz) | Bandwidth of specific channel, pre-defined when any of channel-plan preset is used, but could be manually changed when channel-plan is set to custom. |
disabled (yes | no; Default: no) | Whether specific channel is disabled. |
freq-off (integer [Hz]; Default: ) | Channel frequency offset against radio central frequency, it makes possible to adjust channel frequencies so that channels doesn`t overlap. |
radio (radio0 | radio1; Default: ) | Defines which radio uses selected channel. |
spread-factor (SF7 | SF8 | SF9 | SF10 | SF11 | SF12; Default: ) | Defines the Spread Factor for a channel with type=LoRa. Lower Spread Factor means higher data rate. |
Radios
Sub-menu: /lora radios
Property | Description |
---|---|
center-freq (integer [0..4294967295Hz]; Default: ) | Defines radio central frequency, default value depends on selected channel-plan. |
disabled (yes | no; Default: no) | Whether radio is disabled. |
rssi-off (integer; Default: -162) | Used to calculate precise RSSI level of received packets |
tx-enabled (yes | no; Default: ) | Whether radio is used for transmission. By default one of radios has set tx-enabled=yes and the other has set tx-enabled=no. |
tx-freq-min (integer [0..4294967295Hz]; Default: ) | |
tx-freq-max (integer [0..4294967295Hz]; Default: ) |
Servers
Sub-menu: /lora servers