Difference between revisions of "Manual:Interface/PPP"

From MikroTik Wiki
Jump to: navigation, search
(Properties)
m (add 'add-default-route' value and fix minor typos)
 
Line 2: Line 2:
  
 
__TOC__
 
__TOC__
 +
 +
<div class=manual>
  
 
==Summary==
 
==Summary==
Line 13: Line 15:
 
<p id="shbox"><b>Sub-menu:</b> <code>/interface ppp-client</code></p>
 
<p id="shbox"><b>Sub-menu:</b> <code>/interface ppp-client</code></p>
  
 
+
<h3>Properties</h3>
===Properties===
 
  
 
{{Mr-arg-table-h
 
{{Mr-arg-table-h
Line 39: Line 40:
 
|type=string
 
|type=string
 
|default=
 
|default=
|desc=
+
|desc=Service Provider's Access Point Name
 
}}
 
}}
  
Line 54: Line 55:
 
|default=0
 
|default=0
 
|desc=Which of the port channels used for data transfer. [[Manual:Port | <code>Read more >> </code>]]
 
|desc=Which of the port channels used for data transfer. [[Manual:Port | <code>Read more >> </code>]]
 +
}}
 +
 +
{{Mr-arg-table
 +
|arg=default-route-distance
 +
|type=integer
 +
|default=1
 +
|desc=Since v6.2, sets distance value applied to auto created default route, if <var>add-default-route</var> is also selected
 
}}
 
}}
  
Line 86: Line 94:
 
{{Mr-arg-table
 
{{Mr-arg-table
 
|arg=keepalive-timeout
 
|arg=keepalive-timeout
|type=integer {{!}} disabled
+
|type=integer [0..4294967295]
|default=30
+
|default=30s
|desc=
+
|desc=PPP keepalive timeout in seconds.
 
}}
 
}}
  
Line 151: Line 159:
 
|type=string
 
|type=string
 
|default=""
 
|default=""
|desc=Sim Cards Pin code.
+
|desc=SIM Cards Pin code.
 
}}
 
}}
  
Line 170: Line 178:
 
{{Mr-arg-table
 
{{Mr-arg-table
 
|arg=remote-address
 
|arg=remote-address
|type=IP
+
|type=IP Address
 
|default=
 
|default=
|desc=
+
|desc=Remote IP Address
 
}}
 
}}
  
Line 189: Line 197:
 
|desc=User name used for authentication.
 
|desc=User name used for authentication.
 
}}
 
}}
 
  
 
{{Cont}}
 
{{Cont}}

Latest revision as of 01:07, 26 December 2013

Version.png

Applies to RouterOS: v5, v6+

Summary

Standards: RFC 1661
Package: ppp


PPP Client

Sub-menu: /interface ppp-client

Properties

Property Description
add-default-route (yes | no; Default: no) Whether to add default route to forward all traffic over the tunnel.
allow (pap | chap | mschap1 | mschap2; Default: pap,chap,mschap1,mschap2) Allowed protocols to use for authentication
apn (string; Default: ) Service Provider's Access Point Name
comment (string; Default: ) Descriptive name of an item
data-channel (integer; Default: 0) Which of the port channels used for data transfer. Read more >>
default-route-distance (integer; Default: 1) Since v6.2, sets distance value applied to auto created default route, if add-default-route is also selected
dial-command (string; Default: "ATDT") AT dial command to use. The default one sets tone dialing mode.
dial-on-demand (yes | no; Default: no) Enable/disable dial on demand
disabled (yes | no; Default: yes) Whether interface is disabled or not. By default it is disabled.
info-channel (integer; Default: 0) Which of the port channels used for info. Read more >>
keepalive-timeout (integer [0..4294967295]; Default: 30s) PPP keepalive timeout in seconds.
max-mru (integer; Default: 1500) Maximum Receive Unit. Max packet size that PPP interface will be able to receive without packet fragmentation.
max-mtu (integer; Default: 1500) Maximum Transmission Unit. Max packet size that PPP interface will be able to send without packet fragmentation.
modem-init (string; Default: "") Modem init string
mrru (disabled | integer; Default: disabled) Maximum packet size that can be received on the link. If a packet is bigger than tunnel MTU, it will be split into multiple packets, allowing full size IP or Ethernet packets to be sent over the tunnel. Read more >>
name (string; Default: ) Descriptive name of the interface.
null-modem (yes | no; Default: no) Enable/disable null-modem mode (when enabled, no modem initialization strings are sent)
password (string; Default: "") Password used for authentication.
phone (string; Default: "") Phone number for dial out.
pin (string; Default: "") SIM Cards Pin code.
port (string; Default: "") Serial or USB Port name where modem is connected. Read more >>
profile (name; Default: default) Used PPP profile.
remote-address (IP Address; Default: ) Remote IP Address
use-peer-dns (yes | no; Default: yes) Use DNS server settings from the remote server
user (string; Default: ) User name used for authentication.
[ Top | Back to Content ]