Manual:Interface/PPP

From MikroTik Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Version.png

Applies to RouterOS: v5, v6+

Summary

Standards: RFC 1661
Package: ppp


PPP Client

Sub-menu: /interface ppp-client


Properties

Property Description
add-default-route (yes | no; Default: no) Whether to add default route to forward all traffic over the tunnel.
allow (pap | chap | mschap1 | mschap2; Default: pap,chap,mschap1,mschap2) Allowed protocols to use for authentication
apn (string; Default: )
comment (string; Default: ) Descriptive name of an item
data-channel (integer; Default: 0) Which of the port channels used for data transfer. Read more >>
dial-command (string; Default: "ATDT") AT dial command to use. The default one sets tone dialing mode.
dial-on-demand (yes | no; Default: no) Enable/disable dial on demand
disabled (yes | no; Default: yes) Whether interface is disabled or not. By default it is disabled.
info-channel (integer; Default: 0) Which of the port channels used for info. Read more >>
keepalive-timeout (integer | disabled; Default: 30)
max-mru (integer; Default: 1500) Maximum Receive Unit. Max packet size that PPP interface will be able to receive without packet fragmentation.
max-mtu (integer; Default: 1500) Maximum Transmission Unit. Max packet size that PPP interface will be able to send without packet fragmentation.
modem-init (string; Default: "") Modem init string
mrru (disabled | integer; Default: disabled) Maximum packet size that can be received on the link. If a packet is bigger than tunnel MTU, it will be split into multiple packets, allowing full size IP or Ethernet packets to be sent over the tunnel. Read more >>
name (string; Default: ) Descriptive name of the interface.
null-modem (yes | no; Default: no) Enable/disable null-modem mode (when enabled, no modem initialization strings are sent)
password (string; Default: "") Password used for authentication.
phone (string; Default: "") Phone number for dial out.
pin (string; Default: "") Sim Cards Pin code.
port (string; Default: "") Serial or USB Port name where modem is connected. Read more >>
profile (name; Default: default) Used PPP profile.
remote-address (IP; Default: )
use-peer-dns (yes | no; Default: yes) Use DNS server settings from the remote server
user (string; Default: ) User name used for authentication.


[ Top | Back to Content ]