Manual:Interface/Traffic Engineering
Jump to navigation
Jump to search
Applies to RouterOS: v3, v4
Summary
Properties
Sub-menu: /interface vpls
| Property | Description |
|---|---|
| affinity-exclude (integer; Default: ) | |
| affinity-include-all (integer; Default: ) | |
| affinity-include-any (integer; Default: ) | |
| auto-bandwidth-avg-interval (time; Default: 5m) | |
| auto-bandwidth-range (Disabled | Min[bps][-Max[bps]]; Default: 0bps) | |
| auto-bandwidth-reserve (integer[%]; Default: 0%) | |
| auto-bandwidth-update-interval (time; Default: 1h) | |
| bandwidth (integer[bps]; Default: 0bps) | |
| bandwidth-limit (disabled | integer[%]; Default: disabled) | |
| comment (string; Default: ) | Short description of the item |
| disable-running-check (yes | no; Default: no) | Specifies whether to detect if interface is running or not. If set to no interface will always have running flag. |
| disabled (yes | no; Default: yes) | Defines whether item is ignored or used. |
| from-address (auto | IP; Default: auto) | |
| holding-priority (integer [0..7]; Default: ) | |
| mtu (integer; Default: ) | |
| name (string; Default: ) | Name of the interface |
| primary-path (string; Default: ) | |
| primary-retry-interval (time; Default: 1m) | |
| record-route (yes | no; Default: ) | |
| reoptimize-interval (time; Default: ) | |
| secondary-path (string[,string]; Default: ) | |
| setup-priority (integer[0..7]; Default: ) | |
| to-address (IP; Default: 0.0.0.0) |