Manual:Interface/Wireless

From MikroTik Wiki
Jump to navigation Jump to search

Basic settings

master-interface
{{ #if: interface name|

Syntax: interface name

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: Name of wireless interface that has 'virtual-ap' capability. Virtual AP interface will only work if master interface is in 'ap-bridge', 'bridge' or 'wds-slave' mode. This property is only for virtual AP interfaces.

|

Description: Name of wireless interface that has 'virtual-ap' capability. Virtual AP interface will only work if master interface is in 'ap-bridge', 'bridge' or 'wds-slave' mode. This property is only for virtual AP interfaces.

}}
mode
{{ #if: one of 'station', 'station-wds', 'ap-bridge', 'bridge', 'allignment-only', 'nstreme-dual-slave', 'wds-slave', 'station-pseudobridge' or 'station-pseudobridge-clone' |

Syntax: one of 'station', 'station-wds', 'ap-bridge', 'bridge', 'allignment-only', 'nstreme-dual-slave', 'wds-slave', 'station-pseudobridge' or 'station-pseudobridge-clone'

}}{{ #if: station|

Default value: station

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: Station modes:

  • station - Basic station mode. Find and connect to acceptable AP.
  • station-wds - Same as 'station', but create WDS link with AP, using proprietary extension. AP configuration has to allow WDS links with this device.
  • station-pseudobridge - Same as 'station', but additionally perform MAC address translation of all traffic. Allows interface to be bridged.
  • station-pseudobridge-clone - Same as 'station-pseudobridge', but use station-bridge-clone-mac address to connect to AP.

AP modes:

  • ap-bridge - Basic access point mode.
  • bridge - Same as 'ap-bridge', but limited to one associated client.
  • wds-slave - Same as 'ap-bridge', but initially scans for AP with the same ssid and establishes WDS link. When connection to that AP is lost, AP will scan for it and reestablish link.

Special modes:

  • alignment-only - Put interface in a countinuous transmit mode, that is used for aiming remote antenna.
  • nstreme-dual-slave - allow this interface to be used in nstreme-dual setup.

MAC address translation in pseudobridge modes works by inspecting packets and building table of corresponding IP and MAC addresses. All packets are sent to AP with the MAC address used by pseudobridge, and the MAC address of received packets is restored from the address translation table. There is single entry in address translation table for all non-IP packets, hence more than one host in the bridged network cannot reliably use non-IP protocols.

Virtual AP interfaces do not have this property, they follow the mode of their master interface.

|

Description: Station modes:

  • station - Basic station mode. Find and connect to acceptable AP.
  • station-wds - Same as 'station', but create WDS link with AP, using proprietary extension. AP configuration has to allow WDS links with this device.
  • station-pseudobridge - Same as 'station', but additionally perform MAC address translation of all traffic. Allows interface to be bridged.
  • station-pseudobridge-clone - Same as 'station-pseudobridge', but use station-bridge-clone-mac address to connect to AP.
AP modes:
  • ap-bridge - Basic access point mode.
  • bridge - Same as 'ap-bridge', but limited to one associated client.
  • wds-slave - Same as 'ap-bridge', but initially scans for AP with the same ssid and establishes WDS link. When connection to that AP is lost, AP will scan for it and reestablish link.
Special modes:
  • alignment-only - Put interface in a countinuous transmit mode, that is used for aiming remote antenna.
  • nstreme-dual-slave - allow this interface to be used in nstreme-dual setup.
MAC address translation in pseudobridge modes works by inspecting packets and building table of corresponding IP and MAC addresses. All packets are sent to AP with the MAC address used by pseudobridge, and the MAC address of received packets is restored from the address translation table. There is single entry in address translation table for all non-IP packets, hence more than one host in the bridged network cannot reliably use non-IP protocols. Virtual AP interfaces do not have this property, they follow the mode of their master interface.

}}
ssid
{{ #if: text, up to 32 characters long|

Syntax: text, up to 32 characters long

}}{{ #if: value of Manual:/system/identity|

Default value: value of Manual:/system/identity

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: SSID (service set identifier) is a name that identifies wireless network.

|

Description: SSID (service set identifier) is a name that identifies wireless network.

}}
frequency
{{ #if: Frequency value in MHz.|

Syntax: Frequency value in MHz.

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: Channel frequency on which AP will operate. Allowed values depend on selected band, and are restricetd by country setting and wireless card capabilities.

This setting has no effect if interface is in station mode.|

Description: Channel frequency on which AP will operate. Allowed values depend on selected band, and are restricetd by country setting and wireless card capabilities. This setting has no effect if interface is in station mode.

}}
band
{{ #if: one of '2.4ghz-b', '5ghz', '5ghz-turbo', '2.4ghz-b/g', '2.4ghz-g-turbo', '5ghz-10mhz', '5ghz-5mhz', '2ghz-10mhz', '2ghz-5mhz', '5ghz-11n', '2ghz-11n', '2.4ghz-onlyg'|

Syntax: one of '2.4ghz-b', '5ghz', '5ghz-turbo', '2.4ghz-b/g', '2.4ghz-g-turbo', '5ghz-10mhz', '5ghz-5mhz', '2ghz-10mhz', '2ghz-5mhz', '5ghz-11n', '2ghz-11n', '2.4ghz-onlyg'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
scan-list
{{ #if: comma separated list of frequencies and frequency ranges, or 'default'|

Syntax: comma separated list of frequencies and frequency ranges, or 'default'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: ns:0|

Description: {{{6}}}

}}
antenna-mode
{{ #if: one of these values:
  • ant-a - use only 'a' antenna
  • ant-b - use only 'b' antenna
  • txa-rxb - use antenna 'a' for transmitting, antenna 'b' for receiving
  • rxa-txb - use antenna 'b' for transmitting, antenna 'a' for receiving
|

Syntax: one of these values:

  • ant-a - use only 'a' antenna
  • ant-b - use only 'b' antenna
  • txa-rxb - use antenna 'a' for transmitting, antenna 'b' for receiving
  • rxa-txb - use antenna 'b' for transmitting, antenna 'a' for receiving

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
wds-mode
{{ #if: one of 'disabled', 'static', 'dynamic', 'static-mesh' or 'dynamic-mesh'|

Syntax: one of 'disabled', 'static', 'dynamic', 'static-mesh' or 'dynamic-mesh'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: Controls how WDS links with other devices (APs and clients in 'station-wds' mode) are established.

  • 'disabled' does not allow WDS links.
  • 'static' only allows WDS links that are manually configured in Manual:/interface/wireless/wds
  • 'dynamic' also allows WDS links with devices that are not configured in Manual:/interface/wireless/wds, by creating required entries dynamically. Such dynamic WDS entries are removed automatically after the connection with the other AP is lost.

'-mesh' modes use different (better) method for establishing link between AP, that is not compatible with APs in non-mesh mode.

If mode is 'station-wds', then this property has no effect.

|

Description: Controls how WDS links with other devices (APs and clients in 'station-wds' mode) are established.

  • 'disabled' does not allow WDS links.
  • 'static' only allows WDS links that are manually configured in Manual:/interface/wireless/wds
  • 'dynamic' also allows WDS links with devices that are not configured in Manual:/interface/wireless/wds, by creating required entries dynamically. Such dynamic WDS entries are removed automatically after the connection with the other AP is lost.
'-mesh' modes use different (better) method for establishing link between AP, that is not compatible with APs in non-mesh mode. If mode is 'station-wds', then this property has no effect.

}}
wds-default-bridge
{{ #if: 'none', or name of bridge interface|

Syntax: 'none', or name of bridge interface

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: When WDS link is established and status of the wds interface becomes 'running', it will be added as a bridge port to the bridge interface specified by this property. When WDS link is lost, wds interface is removed from the bridge.

If wds interface is already included in a bridge setup when WDS link becomes active, it will not be added to bridge specified by , and will

|

Description: When WDS link is established and status of the wds interface becomes 'running', it will be added as a bridge port to the bridge interface specified by this property. When WDS link is lost, wds interface is removed from the bridge. If wds interface is already included in a bridge setup when WDS link becomes active, it will not be added to bridge specified by , and will

}}
wds-ignore-ssid
{{ #if: 'yes' or 'no'|

Syntax: 'yes' or 'no'

}}{{ #if: no|

Default value: no

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: By default, WDS link between two APs can be created only when they work on the same frequency and have the same SSID value. If this property is set to 'yes', then SSID of the remote AP will not be checked. This property has no effect on connections from clients in 'station-wds' mode. It also does not work if wds-mode is 'static-mesh' or 'dynamic-mesh'.

|

Description: By default, WDS link between two APs can be created only when they work on the same frequency and have the same SSID value. If this property is set to 'yes', then SSID of the remote AP will not be checked. This property has no effect on connections from clients in 'station-wds' mode. It also does not work if wds-mode is 'static-mesh' or 'dynamic-mesh'.

}}
default-authentication
{{ #if: 'yes' or 'no'|

Syntax: 'yes' or 'no'

}}{{ #if: yes|

Default value: yes

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: For AP mode, this is the value of authentication for clients that do not match any entry in the /interface/wireless/access-list. For station mode, this is the value of connect for APs that do not match any entry in the /interface/wireless/connect-list.

|

Description: For AP mode, this is the value of authentication for clients that do not match any entry in the /interface/wireless/access-list. For station mode, this is the value of connect for APs that do not match any entry in the /interface/wireless/connect-list.

}}
default-forwarding
{{ #if: 'yes' or 'no'|

Syntax: 'yes' or 'no'

}}{{ #if: yes|

Default value: yes

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: This is the value of forwarding for clients that do not match any entry in the /interface/wireless/access-list.

|

Description: This is the value of forwarding for clients that do not match any entry in the /interface/wireless/access-list.

}}
default-ap-tx-limit
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: This is the value of ap-tx-limit for clients that do not match any entry in the /interface/wireless/access-list.

|

Description: This is the value of ap-tx-limit for clients that do not match any entry in the /interface/wireless/access-list.

}}
default-client-tx-limit
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: This is the value of client-tx-limit for clients that do not match any entry in the /interface/wireless/access-list.

|

Description: This is the value of client-tx-limit for clients that do not match any entry in the /interface/wireless/access-list.

}}
hide-ssid
{{ #if: 'yes' or 'no'|

Syntax: 'yes' or 'no'

}}{{ #if: no|

Default value: no

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if:

  • yes - AP does not include SSID the beacon frames, and does not reply to probe requests that have broadcast SSID.
  • no - AP includes SSID in the beacon frames, and replies to probe requests that have broadcast SSID.

This property has effect only in AP mode. Setting it to 'yes' can remove this network from the list of wireless networks that are shown by some client software. Changing this setting does not improve security of the wireless network, because SSID is included in other frames sent by the AP.

|

Description:

  • yes - AP does not include SSID the beacon frames, and does not reply to probe requests that have broadcast SSID.
  • no - AP includes SSID in the beacon frames, and replies to probe requests that have broadcast SSID.
This property has effect only in AP mode. Setting it to 'yes' can remove this network from the list of wireless networks that are shown by some client software. Changing this setting does not improve security of the wireless network, because SSID is included in other frames sent by the AP.

}}
security-profile
{{ #if: name of profile from /interface/wireless/security-profiles|

Syntax: name of profile from /interface/wireless/security-profiles

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
compression
{{ #if: 'yes' or 'no'|

Syntax: 'yes' or 'no'

}}{{ #if: no|

Default value: no

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: Setting this property to 'yes' will allow use of the hardware compression. Wireless interface must have support for hardware compression. Connections with devices that do not use compression will still work.

|

Description: Setting this property to 'yes' will allow use of the hardware compression. Wireless interface must have support for hardware compression. Connections with devices that do not use compression will still work.

}}

Basic information (read only properties)

interface-type
{{ #if: 'virtual-AP', 'Prism', or 'Atheros model_name'|

Syntax: 'virtual-AP', 'Prism', or 'Atheros model_name'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: This specifies type of wireless interface. Some properties have meaning only for certain types of interfaces.|

Description: This specifies type of wireless interface. Some properties have meaning only for certain types of interfaces.

}}


Advanced settings

prism-cardtype
{{ #if: '30mW', '100mW', '200mW'|

Syntax: '30mW', '100mW', '200mW'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: ______|

Description: ______

}}
radio-name
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
area
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
frequency-mode
{{ #if: one of these values:
  • regulatory-domain - Limit available channels and maximum transmit power for each channel according to the value of country
  • manual-txpower - Same as above, but do not limit maximum transmit power.
  • superchannel - Allow all channels supported by the card.
|

Syntax: one of these values:

  • regulatory-domain - Limit available channels and maximum transmit power for each channel according to the value of country
  • manual-txpower - Same as above, but do not limit maximum transmit power.
  • superchannel - Allow all channels supported by the card.

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: List of available channels for each band can be seen in /interface/wireless/info

|

Description: List of available channels for each band can be seen in /interface/wireless/info

}}
country
{{ #if: either 'no_country_set', or name of regulatory domain|

Syntax: either 'no_country_set', or name of regulatory domain

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: Limits available bands, frequencies and maximum transmit power for each frequency. Also specifies default value of scan-list. Value 'no_country_set' is FCC compliant set of channels.|

Description: Limits available bands, frequencies and maximum transmit power for each frequency. Also specifies default value of scan-list. Value 'no_country_set' is FCC compliant set of channels.

}}
antenna-gain
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
rate-list
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
supported-rates-b
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
supported-rates-a/g
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
basic-rates-b
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
basic-rates-a/g
{{ #if: ns:0|

Syntax: {{{2}}}

}}{{ #if: ns:0|

Default value: {{{3}}}

}}{{ #ifeq: ns:0|rq|

Required property

}}{{ #ifeq: ns:0|ro|

Read-only property

}}{{ #ifeq: ns:0|unset|

This is optional property.

}}{{ #if: ns:0|

Description: {{{6}}}

}}
max-station-count
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
act-timeout
{{ #if: 'indoors', 'dynamic', or value in microseconds|

Syntax: 'indoors', 'dynamic', or value in microseconds

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
tx-power
{{ #if: value in the -30..30 range|

Syntax: value in the -30..30 range

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
tx-power-mode
{{ #if: one of these values:
  • default -
  • all-rates-fixed -
  • card-rates -
  • manual-table -
|

Syntax: one of these values:

  • default -
  • all-rates-fixed -
  • card-rates -
  • manual-table -

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
noise-floor-threshold
{{ #if: 'default' or value in the -128..127 range|

Syntax: 'default' or value in the -128..127 range

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
periodic-calibration
{{ #if: one of 'default', 'enabled' or 'disabled'|

Syntax: one of 'default', 'enabled' or 'disabled'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
periodic-calibration-interval
{{ #if: value in range 1..10000|

Syntax: value in range 1..10000

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
burst-time
{{ #if: 'disabled', or value in microseconds|

Syntax: 'disabled', or value in microseconds

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
dfs-mode
{{ #if: one of these values:
  • none -
  • no-radar-detect -
  • radar-detect -
|

Syntax: one of these values:

  • none -
  • no-radar-detect -
  • radar-detect -

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
wds-default-cost
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
wds-cost-range
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
update-stats-interval
{{ #if: 'disabled' or time interval in the 10s..5h range|

Syntax: 'disabled' or time interval in the 10s..5h range

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
proprietary-extensions
{{ #if: 'pre-2.9.25' or 'post-2.9.25'|

Syntax: 'pre-2.9.25' or 'post-2.9.25'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
wmm-support
{{ #if: 'disabled', 'enabled' or 'required'|

Syntax: 'disabled', 'enabled' or 'required'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
disconnect-timeout
{{ #if: time interval in the 0..15s range, in units of 10ms|

Syntax: time interval in the 0..15s range, in units of 10ms

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
on-fail-retry-time
{{ #if: time interval in the 10ms..1s range, in 10ms units|

Syntax: time interval in the 10ms..1s range, in 10ms units

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
preamble-mode
{{ #if: one of 'long', 'short' or 'both'|

Syntax: one of 'long', 'short' or 'both'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
allow-sharedkey
{{ #if: 'yes' or 'no'|

Syntax: 'yes' or 'no'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
station-bridge-clone-mac
{{ #if: MAC address of ______|

Syntax: MAC address of ______

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
ht-rates
{{ #if: comma separated list of numbers 1..8|

Syntax: comma separated list of numbers 1..8

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
ht-guard-interval
{{ #if: 'long', 'short' or 'both'|

Syntax: 'long', 'short' or 'both'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
ht-channel-width
{{ #if: '20mhz', '40mhz' or '2040mhz'|

Syntax: '20mhz', '40mhz' or '2040mhz'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
ht-streams
{{ #if: 'single', 'double' or 'both'|

Syntax: 'single', 'double' or 'both'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
ht-txchains
{{ #if: 1, 5 or 7|

Syntax: 1, 5 or 7

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
ht-rxchains
{{ #if: 1, 5 or 7|

Syntax: 1, 5 or 7

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
hw-retries
{{ #if: number 0..15|

Syntax: number 0..15

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
frame-lifetime
{{ #if: |

Syntax:

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}
adaptive-noise-immunity
{{ #if: 'yes' or 'no'|

Syntax: 'yes' or 'no'

}}{{ #if: |

Default value:

}}{{ #ifeq: |rq|

Required property

}}{{ #ifeq: |ro|

Read-only property

}}{{ #ifeq: |unset|

This is optional property.

}}{{ #if: |

Description:

}}

{{ #if: Reference|}}{{ #if: |[[Category:{{{2}}}]]}}{{ #if: |[[Category:{{{3}}}]]}}{{ #if: |[[Category:{{{4}}}]]}}{{ #if: |[[Category:{{{5}}}]]}}{{ #if: |[[Category:{{{6}}}]]}}{{ #if: |[[Category:{{{7}}}]]}}{{ #if: |[[Category:{{{8}}}]]}}{{ #if: |[[Category:{{{9}}}]]}}