- 1 Overview
- 2 License Levels
- 3 Licenses and RouterOS upgrades
- 4 New 8 symbol SoftID
- 5 Change license Level
- 6 Using the License
- 6.1 Can I Format or Re-Flash the drive?
- 6.2 How many computers can I use the License on?
- 6.3 Can I temporary use the HDD for something else, other than RouterOS?
- 6.4 What is a Replacement Key
- 6.5 Must I type the whole key into the router?
- 6.6 Can I install another OS on my drive and then install RouterOS again later?
- 6.7 I lost my RouterBOARD, can you give me the license to use on another system?
- 6.8 Licenses Purchased from Resellers
- 7 Obtaining Licenses and working with them
- 8 See also
RouterBOARD devices come preinstalled with a RouterOS license, if you have purchased a RouterBOARD device, nothing must be done regarding the license.
For X86 systems (ie. PC devices), you need to obtain a license key.
The license key is a block of symbols that needs to be copied from your mikrotik.com account, or from the email you received in, and then it can be pasted into the router. You can paste the key anywhere in the terminal, or by clicking "Paste key" in Winbox License menu. A reboot is required for the key to take effect.
RouterOS licensing scheme is based on SoftwareID number that is bound to storage media (HDD, NAND).
Licensing information can be read from CLI system console:
[admin@RB1100] > /system license print software-id: "43NU-NLT9" upgradable-to: v7.x nlevel: 6 features: [admin@RB1100] >
You can purchase a Level 3, 4, 5 and 6. Level 1 is the demo license. The difference between license levels is shown in the table.
Level 3 is a wireless station (client) only license. Level 3 can only be obtained in large quantities.
Level 2 was a transitional license from old legacy (pre 2.8) license format. These licenses are not available anymore, if you have this kind of license, it will work, but to upgrade it - you will have to purchase a new license.
Note: current RouterOS version is 5 table modified according to that. The Upgradable-to below applies only to Keys purchased after release of v5
|Level number||0 (FREE)||1 (DEMO)||3 (WISP CPE)||4 (WISP)||5 (WISP)||6 (Controller)|
|Price||no key||registration required||volume only||$45||$95||$250|
|Upgradable To||-||no upgrades||ROS v6.x||ROS v6.x||ROS v7.x||ROS v7.x|
|Initial Config Support||-||-||-||15 days||30 days||30 days|
|Wireless AP||24h limit||-||-||yes||yes||yes|
|Wireless Client and Bridge||24h limit||-||yes||yes||yes||yes|
|RIP, OSPF, BGP protocols||24h limit||-|| yes(*)
|EoIP tunnels||24h limit||1||unlimited||unlimited||unlimited||unlimited|
|PPPoE tunnels||24h limit||1||200||200||500||unlimited|
|PPTP tunnels||24h limit||1||200||200||500||unlimited|
|L2TP tunnels||24h limit||1||200||200||500||unlimited|
|OVPN tunnels||24h limit||1||200||200||unlimited||unlimited|
|VLAN interfaces||24h limit||1||unlimited||unlimited||unlimited||unlimited|
|HotSpot active users||24h limit||1||1||200||500||unlimited|
|RADIUS client||24h limit||-||yes||yes||yes||yes|
|Web proxy||24h limit||-||yes||yes||yes||yes|
|Synchronous interfaces||24h limit||-||-||yes||yes||yes|
|User manager active sessions||24h limit||1||10||20||50||Unlimited|
(*) - BGP is included in License Level3 only for RouterBOARDs, for other devices you need Level4 or above to have BGP.
- never expire
- include 15-30 day free support over e-mail
- can use unlimited number of interfaces
- are for one installation each
- Level3 is not available for purchase individually. For ordering more than 100 L3 licenses, contact sales[at]mikrotik.com
Licenses and RouterOS upgrades
RouterOS can be upgraded only to certain versions. For example if you are running RouterOS v5, your license could restrict the upgrade only to v6, and not to v7. The following examples describe how this is determined:
- There are two types of keys, Level3/L4 and Level5/L6
- The difference between these is that L3 and L4 only allow RouterOS upgrades until the last update of the next version. L5 and L6 however, give you the ability to use one more major version
- There are also differences between all License levels (L3-L6) that are unrelated to RouterOS upgrades, see License levels
So the math is:
- L3/4 = current version + 1 = can use
- L5/6 = current version + 2 = can use
eg. L5/6 = v3 + 2 = v5.21 you can use
- If current version is ROS v3, L3 and L4 will work with v3.1, v3.20, v4,1, v4.20 but NOT v5.0 and beyond
- If current version is ROS v3, L5 and L6 will work with v3.1, v3.20, v4.1, v4.20 and also v5beta1 but NOT v6.0 and beyond
- If current version would be ROS v4, L5 and L6 will work with v4.1, v4.20, v5.1, v5.20 and also v6beta to v6.99 but NOT v7
New 8 symbol SoftID
Since RouterOS 3.25 and 4.0beta3 new SoftID format is introduced. Your license menu will show both the old and the new SoftID. Even by upgrading to a new version, RouterOS will still work as before, but to use some of the new features, LICENSE UPDATE will be necessary. To do this, just click on "Update license key" button in Winbox (currently only in Winbox).
New SoftID's are in the form of XXXX-XXXX (Four symbols, dash, four symbols).
The following actions will be taken:
- Winbox will contact www.mikrotik.com with your old SoftID
- www.mikrotik.com will check the database and see details about your key
- the server will generate a new key as "upgrade" and put it into the same account as old one
- Winbox will receive the new key and automatically License your router with the new key
- Reboot will be required
- New RouterOS features will be unlocked
Important Note!: If you see this button also in v3.24, don't use it, it will not work.
If you ever wish to downgrade RouterOS, you will have to apply the OLD key before doing so. When RouterOS applies the NEW key, the OLD key is saved to a file, in the FILES folder, to make sure you have the old key handy.
Even more important: Don't downgrade v4.0b3 to v3.23 or older. Use only v3.24 for downgrading, or you might lose your new format key.
Change license Level
- There are no license level upgrades, if you wish to use a different license Level, please purchase the appropriate level. Be very careful when purchasing for the first time, choose the correct option.
- Why is it not possible to change license level (ie. upgrade license)? Just like you can't easily upgrade your car's engine from 2L to 4L just by paying the difference, you can't switch license levels as easily. This is a policy used by many software companies, choose wisely when making your purchase! Instead we have lowered the prices, and removed the software update time limit.
Using the License
Can I Format or Re-Flash the drive?
Formatting, and Re-Imaging the drive with non-mikrotik tools (like DD and Fdisk) will destroy your license! Be very careful and contact mikrotik support before doing this. It is not recommended, as mikrotik support might deny your request for a replacement license.
How many computers can I use the License on?
At the same time, the RouterOS license can be used only in one system. The License is bound to the HDD it is installed on, but you have the ability to move the HDD to another computer system. You cannot move the License to another HDD, neither can you format or overwrite the HDD with the RouterOS license. It will be erased from the drive, and you will have to get a new one. If you accidently removed your license, contact the support team for help.
Can I temporary use the HDD for something else, other than RouterOS?
As stated above, no.
What is a Replacement Key
It is a special key which is issued by the Support Team if you accidently lose the license, and the Mikrotik Support decides that it is not directly your fault. It costs 10$ and has the same features as the key that you lose. Note that before issuing such key, the Mikrotik Support can ask you to prove that the old drive is failed, in some cases this means sending us the dead drive.
Must I type the whole key into the router?
No, simply copy it and paste into the Telnet window, or License menu in Winbox.
Can I install another OS on my drive and then install RouterOS again later?
No, because if you use formatting or partitioning utilities, or tools that do something to the MBR, you will lose the license and you will have to make a new one. This process is not free (see Replacement Key above)
I lost my RouterBOARD, can you give me the license to use on another system?
The RouterBOARD comes with an embedded license. You cannot move this license to a new system in any way, this includes upgrades applied to the RouterBOARD while it was still working.
Licenses Purchased from Resellers
The keys that you purchase from other vendors and resellers, are not in your account. Your mikrotik.com account only contains licenses purchased from MikroTik directly. However, you can use the "Request key" link in your account, to get the key into your account for reference, or for some upgrades (if available).
Obtaining Licenses and working with them
Where can I buy a RouterOS license key?
In the Account Server, which is located on www.mikrotik.com
If I have purchased my key elsewhere
You must contact the company who sold you the license, they will provide support
If I have a license and want to put it on another account?
You can give access to keys with the help of Virtual Folders