Manual:MPLS

From MikroTik Wiki
Revision as of 13:49, 3 October 2011 by Marisb (talk | contribs)
Jump to: navigation, search

Sub Categories

List of reference sub-pages

Case studies

List of examples

General


Layer2 VPN


Layer3 VPN


Traffic Engineering

General


Layer2 VPN


Layer3 VPN


Traffic Engineering


Summary

MikroTik RouterOS supports MPLS. All MikroTik RouterBOARD hardware products support MPLS.

General Porperties

Property Description
dynamic-label-range (range of integer[16..1048575]; Default: 16-1048575) Range of Label numbers used for dynamic allocation. First 16 labels are reserved for special purposes (as defined in RFC). If you intend to configure labels statically then adjust dynamic default range not to include numbers that will be used in static configuration.
propagate-ttl (yes | no; Default: yes) Whether to copy TTL values from IP header to MPLS header. If this option is set to no then hops inside MPLS cloud will be invisible from traceroutes.


Forwarding Table

Interface

Local Bindings

Remote Bindings

[ Top | Back to Content ]