Difference between revisions of "Manual:Metarouter"

From MikroTik Wiki
Jump to: navigation, search
(Example)
(Example)
Line 20: Line 20:
  
 
   [admin@MikroTik] /metarouter> add
 
   [admin@MikroTik] /metarouter> add
 
 
   [admin@MikroTik] /metarouter> print
 
   [admin@MikroTik] /metarouter> print
 
   Flags: X - disabled  
 
   Flags: X - disabled  
 
   #  NAME                MEMORY-SIZE DISK-SIZE    USED-DISK    STATE         
 
   #  NAME                MEMORY-SIZE DISK-SIZE    USED-DISK    STATE         
 
   0  mr0                  16MiB      0kiB          377kiB        running       
 
   0  mr0                  16MiB      0kiB          377kiB        running       
 
 
   [admin@MikroTik] /metarouter> console 0
 
   [admin@MikroTik] /metarouter> console 0
  
 
(To get out of the console do ctrl-A and then q)
 
(To get out of the console do ctrl-A and then q)
 +
 +
 +
[[Category:Manual]]
 +
[[Category:Unfinished]]

Revision as of 18:30, 18 December 2008

Overview

MetaRouter is a new feature in RouterOS 4.0 beta 1.

MetaRouter is used for the RB400 series boards to create virtual routers.

Commands

The /metarouter menu gives the following:

  • add - allows you to create a new virtual router
  • print - lets you list any virtual routers
  • enable - to enable a virtual router
  • disable - to diable a virtual router
  • console - lets you access the console of a virtual router
  • interface - lets you make network interface mappings

Example

 [admin@MikroTik] /metarouter> add
 [admin@MikroTik] /metarouter> print
 Flags: X - disabled 
 #   NAME                 MEMORY-SIZE DISK-SIZE     USED-DISK     STATE        
 0   mr0                  16MiB       0kiB          377kiB        running      
 [admin@MikroTik] /metarouter> console 0

(To get out of the console do ctrl-A and then q)