Manual:Performance Testing with Traffic Generator

From MikroTik Wiki
Revision as of 16:01, 11 October 2012 by Marisb (talk | contribs) (Created page with "__TOC__ ==Summary== ==RB1100AHx2 Test setup== === Routing Performance Testing=== ==== DUT Config ==== <pre> /ip address add address=1.1.1.254/24 interface=ether1 network=1.1....")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Summary

RB1100AHx2 Test setup

Routing Performance Testing

DUT Config

/ip address
add address=1.1.1.254/24 interface=ether1 network=1.1.1.0
add address=2.2.2.254/24 interface=ether6 network=2.2.2.0
add address=3.3.3.254/24 interface=ether11 network=3.3.3.0


Traffic Generator Config

/ip address
add address=1.1.1.1/24 interface=ether1 network=1.1.1.0
add address=2.2.2.2/24 interface=ether6 network=2.2.2.0
add address=3.3.3.3/24 interface=ether11 network=3.3.3.0

/tool traffic-generator packet-template
add name=r12 header-stack=mac,ip,udp ip-gateway=1.1.1.254 ip-dst=2.2.2.2
add name=r13 header-stack=mac,ip,udp ip-gateway=1.1.1.254 ip-dst=3.3.3.3
add name=r21 header-stack=mac,ip,udp ip-gateway=2.2.2.254 ip-dst=1.1.1.1
add name=r23 header-stack=mac,ip,udp ip-gateway=2.2.2.254 ip-dst=3.3.3.3
add name=r32 header-stack=mac,ip,udp ip-gateway=3.3.3.254 ip-dst=2.2.2.2
add name=r31 header-stack=mac,ip,udp ip-gateway=3.3.3.254 ip-dst=1.1.1.1
Icon-note.png

Note: To force MAC address re-discovery (on device/configuration change, just apply emply "set" command to necessary packet-templates)



Running Tests

/tool traffic-generator
quick tx-template=r12,r13,r21,r23,r31,r32 packet-size=60 mbps=300

We are specifying 60byte packet in traffic generator to get 64 byte packet on ethernet.

Do the same with different packet sizes:

/tool traffic-generator
quick tx-template=r12,r13,r21,r23,r31,r32 packet-size=508 mbps=500
/tool traffic-generator
quick tx-template=r12,r13,r21,r23,r31,r32 packet-size=1514 mbps=500


Icon-note.png

Note: mind that speed in quick mode is specified per stream, so if you have two streams per port, you need to send 1/2 of traffic per stream



Bridging Performance Testing

DUT Config

Traffic Generator Config

Running Tests

See More