Manual:PoE-Out

From MikroTik Wiki
Revision as of 17:27, 15 February 2012 by Janisk (talk | contribs) (Powered devices: more devices)
Jump to: navigation, search

Summary

this page describes what boards can be powered using RB750UP and OmniTik UPA. More about features read in PoE out manual

Powered devices

Table contain information on what devices can be powered using RB750UP and OmniTik UPA as power source for PoE

Polarity: standard - blue pair positive, brown pair negative; reversed - blue pair negative , brown pair positive, any - either standard or reversed.

Device forced-on auto-on polarity
RouterBOARD RB433GL yes yes any
RouterBOARD RB450G yes yes any
RouterBOARD RB711G-5HnD yes yes any
RouterBOARD RB711G-5HnD yes yes any
RouterBOARD RB450 yes yes standard
RouterBOARD RB153 yes yes standard
RouterBOARD RB433AH yes yes standard
Motorolla Canopy yes yes reversed
RouterBOARD RB435G yes yes any
RouterBOARD RB493AH yes yes standard
RouterBOARD RB532 yes yes standard
Ubiquity LOCO900 yes yes standard
Ubiquity Bullet M2 yes yes standard
Ubiquity Bullet M5 yes yes standard
Ubiquity NanoStation 2N yes yes standard
Ubiquity NanoStation M365 yes yes standard
Ubiquity UniFi AP yes yes standard
Ubiquity UniFi AP long range yes yes standard

Wiring

If you want to power device that supports only reverse polarity using 'RB750UP and OmniTik UPA you have to make special cable that will swap required wires, thus enabling you to power these devices.

On one end you have to have standard RJ45 T568B wiring (orange striped, orange, green striped, blue, blue striped, green, brown striped, brown) and on other and has to have blue and brown pair swapped resulting in (orange striped, orange, green striped, brown, brown striped, green, blue striped, blue)