Manual:Queues - Burst

From MikroTik Wiki
Revision as of 13:15, 13 October 2008 by Megis (talk | contribs)
Jump to navigation Jump to search

Theory

To understand burst it is necessary to be aware of 5 concepts:

  1. burst-limit (NUMBER) : maximal upload/download data rate which can be reached while the burst is active
  2. burst-time (TIME) : period of time, in seconds, over which the average data rate is calculated. (This is NOT the time of actual burst)
  3. burst-threshold (NUMBER) : when average data rate is below this value - burst is allowed, as soon as average data rate reach this value - burst is denied. (basically this is burst on/off switch). For optimal burst behavior this value should above limit-at value and below max-limit value
  4. average-rate (read-only) : Every 1/16 part of the burst-time, the router calculates the average data rate of each class over the last burst-time seconds.
  5. actual-rate (read-only) : actual traffic transfer rate of the queue


Example1

Burst time.8.part1.JPG Burst time.8.part2.JPG


Example2

Burst time.16.part1.JPG Burst time.16.part2.JPG