Manual:Queues - Burst

From MikroTik Wiki
Revision as of 06:43, 14 October 2008 by Megis (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Theory

To understand burst it is necessary to be aware of 5 concepts:

  1. burst-limit (NUMBER) : maximal upload/download data rate which can be reached while the burst is active
  2. burst-time (TIME) : period of time, in seconds, over which the average data rate is calculated. (This is NOT the time of actual burst)
  3. burst-threshold (NUMBER) : when average data rate is below this value - burst is allowed, as soon as average data rate reach this value - burst is denied. (basically this is burst on/off switch). For optimal burst behavior this value should above limit-at value and below max-limit value
  4. average-rate (read-only) : Every 1/16 part of the burst-time, the router calculates the average data rate of each class over the last burst-time seconds.
  5. actual-rate (read-only) : actual traffic transfer rate of the queue

To simplify calculations for examples we will use limit-at=1M, max-limit=2M, burst-threshold=1500k, burst-limit=4M


Example Burst-time=8s

Seconds Actual Rate Average Rate Allow Burst
0 0Mbps (0+0+0+0+0+0+0+0)/8=0Mbps Yes



Burst time.8.part1.JPG Burst time.8.part2.JPG


Example Burst-time=16s

Burst time.16.part1.JPG Burst time.16.part2.JPG