Difference between revisions of "Manual:Reset"

From MikroTik Wiki
Jump to: navigation, search
Line 7: Line 7:
 
3. Type r
 
3. Type r
  
 +
Example
  
                      Example
 
 
MikroTik 3.0rc13
 
MikroTik 3.0rc13
 
MikroTik Login:
 
MikroTik Login:

Revision as of 15:15, 21 April 2008

RouterOS password can only be reset by reinstalling the router, or using the reset jumper in case the hardware is RouterBOARD.

If u lost the password on router board u may reset by this procedure:

1. Reset the router board. 2. Press any key when it's tell u to do that. 3. Type r

Example

MikroTik 3.0rc13 MikroTik Login:

RouterBOOT booter 2.12

RouterBoard 1000

CPU frequency: 1333 MHz

 Memory size: 512 MB

Press any key within 2 seconds to enter setup.

RouterBOOT-2.12 What do you want to configure?

  d - boot delay
  k - boot key
  s - serial console
  o - boot device
  r - reset configuration
  e - format nand
  g - upgrade firmware
  i - board info
  p - boot protocol
  t - do memory testing
  x - exit setup

your choice: