Difference between revisions of "Manual:Reset"

From MikroTik Wiki
Jump to: navigation, search
Line 1: Line 1:
 
RouterOS password can only be reset by reinstalling the router, or using the reset jumper in case the hardware is RouterBOARD.
 
RouterOS password can only be reset by reinstalling the router, or using the reset jumper in case the hardware is RouterBOARD.
 
If u lost the password on router board  u may reset by this procedure:
 
 
1. Reset the router board.
 
2. Press any key when it's tell u to do that.
 
3. Type r
 
 
Example
 
 
MikroTik 3.0rc13
 
MikroTik Login:
 
 
RouterBOOT booter 2.12
 
 
RouterBoard 1000
 
 
CPU frequency: 1333 MHz
 
Memory size: 512 MB
 
 
Press any key within 2 seconds to enter setup.
 
 
RouterBOOT-2.12
 
What do you want to configure?
 
  d - boot delay
 
  k - boot key
 
  s - serial console
 
  o - boot device
 
  r - reset configuration
 
  e - format nand
 
  g - upgrade firmware
 
  i - board info
 
  p - boot protocol
 
  t - do memory testing
 
  x - exit setup
 
your choice:
 

Revision as of 15:20, 21 April 2008

RouterOS password can only be reset by reinstalling the router, or using the reset jumper in case the hardware is RouterBOARD.