Difference between revisions of "Manual:Reset"

From MikroTik Wiki
Jump to: navigation, search
Line 4: Line 4:
 
[[Image:Resethole.jpg]]
 
[[Image:Resethole.jpg]]
  
This image shows the location of the Reset Jumper on older RouterBOARDs like RB133C:
+
The '''below''' image shows the location of the Reset Jumper on older RouterBOARDs like RB133C:
  
 
[[Image:CRW 5184.jpg]]
 
[[Image:CRW 5184.jpg]]

Revision as of 11:14, 26 January 2009

RouterOS password can only be reset by reinstalling the router, or using the reset jumper (or jumper hole) in case the hardware is RouterBOARD. For RouterBOARDS just close the jumper and boot the board until the configuration is cleared. For some RouterBOARDs there is not a jumper, but a jumper hole - just put a metal object into the hole, and boot the board.


Resethole.jpg

The below image shows the location of the Reset Jumper on older RouterBOARDs like RB133C:

CRW 5184.jpg