Difference between revisions of "Manual:Reset"

From MikroTik Wiki
Jump to: navigation, search
Line 3: Line 3:
 
If u lost the password on router board  u may reset by this procedure:
 
If u lost the password on router board  u may reset by this procedure:
  
1. Reset the router board.
+
1. Reset the router board.
2. Press any key when it's tell u to do that.
+
2. Press any key when it's tell u to do that.
3. Type r
+
3. Type r
  
 
Example
 
Example
Line 17: Line 17:
  
 
CPU frequency: 1333 MHz
 
CPU frequency: 1333 MHz
  Memory size: 512 MB
+
Memory size: 512 MB
  
 
Press any key within 2 seconds to enter setup.
 
Press any key within 2 seconds to enter setup.

Revision as of 16:15, 21 April 2008

RouterOS password can only be reset by reinstalling the router, or using the reset jumper in case the hardware is RouterBOARD.

If u lost the password on router board u may reset by this procedure:

1. Reset the router board.
2. Press any key when it's tell u to do that.
3. Type r

Example

MikroTik 3.0rc13 MikroTik Login:

RouterBOOT booter 2.12

RouterBoard 1000

CPU frequency: 1333 MHz Memory size: 512 MB

Press any key within 2 seconds to enter setup.

RouterBOOT-2.12 What do you want to configure?

  d - boot delay
  k - boot key
  s - serial console
  o - boot device
  r - reset configuration
  e - format nand
  g - upgrade firmware
  i - board info
  p - boot protocol
  t - do memory testing
  x - exit setup

your choice: