Manual:Reset button

The RouterBOARD reset button has several functions. This article describes how to achieve all of it's functions

Functions

• Loading the backup RouterBOOT loader, in case primary loader
  Hold this button before applying power, release after three seconds since powering, to load backup Boot loader (total 3 seconds)

• Resetting the RouterOS configuration
  If you keep holding this button for 2 more seconds until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds)

• Enabling CAPs mode, to connect this device to a wireless network managed by CAPsMAN
  Keep holding for 5 more seconds, LED turns solid, release now to turn on CAPs mode (total 10 seconds)

• Starting the RouterBOARD in Netinstall mode, it will look for nearby Netinstall servers
  Or Keep holding the button for 5 more seconds until until LED turns off, then release it to make the RouterBOARD look for Netinstall servers. You can also simply keep the button pressed until the device shows up in the Netinstall program on Windows (total 15 seconds)

Notes

You can also do the previous three functions without loading the backup loader, simply push the button immediately after you apply power. You might need the assistance of another person to push the button and also plug the power supply at the same time.