Manual:Routing/BFD: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
m (Protected "BFD" ([edit=sysop] (indefinite) [move=sysop] (indefinite)))
No edit summary
Line 1: Line 1:
BFD protocol for routing
BFD protocol for routing
==Requirements==
Starting from RouterOS version v4.4, BFD is supported.


==Summary==
==Summary==
Line 17: Line 14:
* provides sub-second link failure detection support;
* provides sub-second link failure detection support;
* not routing protocol specific, unlike protocol hello timers or such
* not routing protocol specific, unlike protocol hello timers or such
==Requirements==
RouterOS 4.4 or newer with routing package installed.


==Features supported==
==Features supported==

Revision as of 09:50, 22 December 2009

BFD protocol for routing

Summary

BFD is a protocol intended to detect faults in the bidirectional path between two forwarding engines, including physical interfaces, sub-interfaces, data link(s), and to the extent possible the forwarding engines themselves, with potentially very low latency. It operates independently of media, data protocols, and routing protocols.

Bidirectional Forwarding Detection (BFD):

  • hello protocol for checking bidirectional neighbor reachability;
  • provides sub-second link failure detection support;
  • not routing protocol specific, unlike protocol hello timers or such

Requirements

RouterOS 4.4 or newer with routing package installed.

Features supported

  • asynchronous mode (draft-ietf-bfd-base-09.txt)
  • BFD timer and detection multiplier configuration per interface;
  • enabling BFD for OSPF interfaces
  • enabling BFD for BGP peers
  • single hop IPv4 and IPv6 transport (draft-ietf-bfd-v4v6-1hop-10.txt)
  • multihop IPv4 and IPv6 transport (draft-ietf-bfd-multihop-08.txt)

Configuration

BFD configuration should be added in different places as required

OSPF

/routing ospf interface add interface=all use-bfd=yes

BGP

/routing bgp peer add remote-address=x.x.x.x remote-as=xxxxx use-bfd=yes

BFD timer configuration

/routing bfd interface

BFD neighbor status

/routing bfd neighbor