Manual:Store - after v6.20 release
Content to be added! ~
Since v6.20 release attached storage are now managed in "/disk" sub-menu, instead of previous "/store disk" menu.
- This menu will list all attached storage devices, presuming that they are supported and in working condition.
- As a note, Webproxy and User manager stores as now shown as directories in "/files menu". When configuring webproxy cache or usermanager database you will now be asked to write in path of directory where you want these stores to be created.
- Since this change Dude database storage is broken and The Dude package can no longer be used since this release, till any further notice.
This is especially useful for RouterBOARD devices with SD/CF/USB slots and x86 systems with additional dedicated storage drives - as the built-in storage is quite small, an external drive comes in very handy when you want a big User Manager database, proxy cache or possibly SMB shares on your router.
You can add as many external or secondary drives as you want, and select any number of them for each of the mentioned feature use. For example User Manager could be used on 3 disks, one of them would be the active database, and the rest would be backups. You can then add a fourth disk, copy the active data to it - unmount - unplug it - and move to another server, to keep using the actual database. This means migration and backup made easy!
Formatting attached storage unit - quick version, showing just example of command to issue to perform this process
1. Disk is attached, and already mounted automatically by system.
[admin@MikroTik] > /disk print # NAME LABEL TYPE DISK FREE SIZE 0 disk1 usb-flash ext3 \00 7.1GiB 7.2GiB
[admin@MikroTik] > /file print # NAME TYPE SIZE CREATION-TIME 2 skins directory jan/01/1970 03:00:01 3 pub directory feb/04/1970 21:31:40 4 disk1 disk apr/20/2015 14:05:16
2. Unmounting storage drive in order to format it.
[admin@MikroTik] > /disk eject-drive 0
3. Formating the disk, in either of two supported file-systems (ext3 or fat32).
[admin@MikroTik] > /disk format-drive 0 file-system=ext3 label=flashdrive formatted: 100%
4. It's done! Drive is formatted and should be automatically mounted after formatting process was finished.
Formating attached storage unit - long version with explanation of what you are about to do and what is about to happen. Possibly useful to novices.
Lets presume that you have added storage device to your device that is running RouterOS. System will try to automatically mount it, and in such case if storage is formatted in supported file-system and partition record it will be found in "/files" menu moments after you plugged it in host device.
If not here's what you have to do.
1. Do a quick print of disk menu, to make sure that router sees the attached storage.
[admin@MikroTik] > disk print # NAME LABEL TYPE DISK FREE SIZE 0 disk1 NO NAME fat32 \00 6.6GiB 7.2GiB
We can here see that system sees one storage drive and also that it is formatted with known file-system type.
When running file menu printout we also see that is mounted.
[admin@MikroTik] > file print # NAME TYPE SIZE CREATION-TIME 0 disk1 disk apr/20/2015 13:44:11 1 skins directory jan/01/1970 03:00:01 2 pub directory feb/04/1970 21:31:40
2. Now to format it we must first unmount it. To do that we need to issue following command that is pasted below. Note that you can use disk "id" or "name" for this task. ID number is usable only after print command on specific menu has been issued and presuming that order or count has not changed, as that would also possibly change the id. OR this disk name identifier which in example case would be
"NO NAME". Name can be used without issuing print as that is static value and should not change if not changed manually by you.
In short: using ID of disk easy, but printout of this menu must fist be done.
[admin@MikroTik] > disk eject-drive 0
In short: using name, quicker if you know the device name. But "" need to be added if this value contains spaces of some symbols that might confuse console.
[admin@MikroTik] > disk eject-drive "NO NAME"
3. Formatting drive now that it is unmounted. We issue command with previously know id or name and with desired file-system (ext3 or fat32), we can also assign label to device as I did in this example.
[admin@MikroTik] > /disk format-drive 0 file-system=ext3 label=usb-flash formatted: 100%
Content yet to be added!
|eject-drive (Integer; Default: )||Safely unmounts (ejects) drive of your selection by using drive ID or NAME that is assigned to it. After issuing this command it can be removed from host device. If drive is sata/etc on x86 device must be previously also shut down or hot-plug for sata interfaces must be enabled in bios is such feature is supported.|
|format-drive (; Default: )||Command to initiate disk formatting process. Contains additional properties of it's own. Like "file-system" and "label".|
|file-system (String; Default: fat32 | ext3)||Command to initiate disk formatting process. Contains additional properties of it's own. Like "file-system" and "label".|
|label (String)||Label to assign to disk that you did did or will format.|