Difference between revisions of "Manual:System/GPS"

From MikroTik Wiki
Jump to navigation Jump to search
Line 13: Line 13:
Global Positioning System (GPS) is used for determining precise location of a GPS receiver.
Global Positioning System (GPS) is used for determining precise location of a GPS receiver.


==Properties==
==Configuration Properties==


{{Mr-arg-table-h
{{Mr-arg-table-h
Line 21: Line 21:


{{Mr-arg-table
{{Mr-arg-table
|arg=
|arg=channel
|type=string
|type=integer [0..4294967295]
|default=<>
|default=0
|desc=
|desc=Port channel used by device
 
}}
 
{{Mr-arg-table
|arg=enabled
|type=yes {{!}} no
|default=no
|desc=Whether GPS is enabled


}}
}}


{{Mr-arg-table-end
 
|arg=
{{Mr-arg-table
|arg=port
|type=string
|type=string
|default=""
|default=
|desc=
|desc=Name of the USB/Serial port where GPS receiver is connected


}}
}}


{{Mr-arg-table-end
|arg=set-system-time
|type=yes {{!}} no
|default=no
|desc=Whether to set router's date and time to one received from GPS.
}}


{{Note | . }}
{{Note | . }}

Revision as of 06:56, 5 September 2011

Version.png

Applies to RouterOS: v3, v4, v5 +

Summary

Sub-menu: /system gps
Standards: GPS, NMEA 0183, Simple Text Output Protocol

Global Positioning System (GPS) is used for determining precise location of a GPS receiver.

Configuration Properties

Property Description
channel (integer [0..4294967295]; Default: 0) Port channel used by device
enabled (yes | no; Default: no) Whether GPS is enabled
port (string; Default: ) Name of the USB/Serial port where GPS receiver is connected
set-system-time (yes | no; Default: no) Whether to set router's date and time to one received from GPS.
Icon-note.png

Note: .


Monitor

This command is used for monitoring the data received from a GPS receiver

Pparameters:


Basic examples

[ Top | Back to Content ]