Difference between revisions of "Manual:System/GPS"

From MikroTik Wiki
Jump to navigation Jump to search
Line 54: Line 54:
{{Note | . }}
{{Note | . }}


==Monitor==
==Monitoring Status==
 
<p id="shbox"><b>Command:</b> <code>/system gps monitor</code></p>


Command: /system gps monitor


This command is used for monitoring the data received from a GPS receiver
This command is used for monitoring the data received from a GPS receiver


Parameters:
'''Parameters:'''
{{Mr-arg-table-h
{{Mr-arg-table-h
|prop=Property
|prop=Property

Revision as of 07:03, 5 September 2011

Version.png

Applies to RouterOS: v3, v4, v5 +

Summary

Sub-menu: /system gps
Standards: GPS, NMEA 0183, Simple Text Output Protocol

Global Positioning System (GPS) is used for determining precise location of a GPS receiver.

Configuration Properties

Property Description
channel (integer [0..4294967295]; Default: 0) Port channel used by device
enabled (yes | no; Default: no) Whether GPS is enabled
port (string; Default: ) Name of the USB/Serial port where GPS receiver is connected
set-system-time (yes | no; Default: no) Whether to set router's date and time to one received from GPS.
Icon-note.png

Note: .


Monitoring Status

Command: /system gps monitor


This command is used for monitoring the data received from a GPS receiver

Parameters:

Property Description
date-and-time () Date and time received from GPS
latitude (none |)
longitude (none |)
speed (none |)
bearing (none |)
valid (yes | no)
satellites (integer) Number of satellites seen by the device.

Basic examples

[ Top | Back to Content ]