Difference between revisions of "Manual:System/Health"

From MikroTik Wiki
Jump to: navigation, search
(initial placeholder)
 
m (Fan control)
Line 13: Line 13:
 
Using this menu users will be able to control fan behaviour on the router.
 
Using this menu users will be able to control fan behaviour on the router.
 
{{Warning|for ''auto'' mode to work you have to use fans that support monitoring (it will have 3 wires) If you have fan with only 2 wires (V+,GND) then you have to set fan-mode to manual. If control pulse cannot be detected, then router will switch between main and auxiliary fan and stop only when it detects fan with control}}
 
{{Warning|for ''auto'' mode to work you have to use fans that support monitoring (it will have 3 wires) If you have fan with only 2 wires (V+,GND) then you have to set fan-mode to manual. If control pulse cannot be detected, then router will switch between main and auxiliary fan and stop only when it detects fan with control}}
 +
 +
[[Category: Manual|Health]]
 +
[[Category: System|Health]]
 +
[[Category:Basic|Health]]

Revision as of 13:08, 9 June 2010

Summary

Hardware that supports monitoring will display different information about hardware status, like temperature, voltage.

Voltage

Routers that support voltage monitoring will display supplied voltage value. In CLI/Winbox it will display volts. In scripts/API/SNMP this will be dV or value showed in CLI/Winbox multiplied by 10

Temperature

Routers that support temperature monitoring will display temperature reading. In CLI/Winbox it will display degrees Celsius. In scripts/API/SNMP this will be value showed in CLI/Winbox multiplied by 10

Fan control

Using this menu users will be able to control fan behaviour on the router.

Icon-warn.png

Warning: for auto mode to work you have to use fans that support monitoring (it will have 3 wires) If you have fan with only 2 wires (V+,GND) then you have to set fan-mode to manual. If control pulse cannot be detected, then router will switch between main and auxiliary fan and stop only when it detects fan with control