Manual:TOC/MikroTik POE in compatibility table

From MikroTik Wiki
< Manual:TOC
Revision as of 14:01, 13 January 2016 by Strods (talk | contribs)
Jump to: navigation, search

PoE-IN compatibility

This document clarifies PoE-IN compatibility of MikroTik RouterBOARD hardware.

All tests are made with unshielded cable.

List of tested PoE out equipment

# Product Model PoE standard Pins
1 Linksys 24-port Gigabit switch LGS124P 54V 802.3af/at (1,2-)(3,6+)
2 Edimax 8-port 100Mbit switch ES-1008P 48V 802.3af/at (1,2+)(3,6-)
3 HP 8-port Gigabit switch 1910-8G-Poe+ (JG350A) 54V 802.3af/at (1,2-)(3,6+)
4 Trendnet 16-port 100Mbit switch TPE-T160H 48V 802.3af/at (1,2-)(3,6+)
5 TP-Link 24-port Gigabit switch TL-SG3424P 54V 802.3af/at (1,2-)(3,6+)
6 Netgear 8-port Gigabit switch GS510TP 54V 802.3af/at (1,2-)(3,6+)
7 Phihong Midspan 2 100Mbit ports POE31U-560 56V 802.3at/af (4,5+)(7,8-)
8 Phihong Midspan 2 Gigabit ports POE20U-560(G) 56V 802.3af ( 1,2-)(3,6+)
9 Phihong Midspan 2 100Mbit ports PSA16U-480(POE) 48V 802.3af (4,5+)(7,8-)
10 D-link 24-port 100Mbit switch DES-3200-28P 54V 802.3af/at (1,2-)(3,6+)
11 Planet 8-port Gigabit switch GSD-908HP 51V 802.3af/at (1,2+)(3,6-)
12 Engenius 8-port Gigabit switch EGS5110P 54V 802.3af/at (1,2-)(3,6+)
13 Camswitch 4 plus VCS-4P1 57V 802.3af/at (1,2-)(3,6+)
14 DELL 3448P 48V 802.3af (4,5+)(7,8-)
15 EdgeSwich24 ES-24-500w 24/48V 802.af/at (1,2+)(3,6-)

List of tested devices

RouterBOARD Power over data lines (1,2+)(3,6-) Power over data lines (1,2-)(3,6+) 12V battery supply support Negative voltage -48V support Shielded cable Compatibility with PoE switch
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
RB800 + + DC + + + + + + - + + + + + + + + + +
CRS109-8G-1S-2HnD + C + - +* C + C C C C + C + - + C C + +
CRS210-8G-2S+ + C + - +* C + C C C C + C + C + C C + +
POE-CON-HP - - - + +* - - - - - - + - + - - - - + -
GPOE-CON-HP + + - + +* + + + + + + + + + + + + + + +
wAP + + + - +* + + + + + + + + + + N/A + + N/A N/A
DynaDish 5 + C - - +* C + C C C C + C + C + C C + +
mAP lite C + + - + + C + + + + + + + + C + + + C
Icon-note.png

Note: This list will be periodically updated with latest test results.


Icon-note.png

Note: * - If other vendor PoE-OUT product is used to power up this device, then only one side shielded cable might be required.


Legend:

C Works only with crossover cable
DC DC jack only
+ Supported
- Not supported
N/A Information not available
Retrieved from "https://wiki.mikrotik.com/index.php?title=Manual:TOC/MikroTik_POE_in_compatibility_table&oldid=27975"