Manual:The Dude/Device settings: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
No edit summary
Line 15: Line 15:
* '''RouterOS''' - Whether this device is running RouterOS. Decides whether to show RouterOS specific configuration options
* '''RouterOS''' - Whether this device is running RouterOS. Decides whether to show RouterOS specific configuration options


After clicking '''Next''' you will be asked to select which services you wish to be monitored on the newly created device:
After clicking '''Next''' you will be asked to select which services you wish to be monitored on the newly created device. It is also possible to scan for services with the '''Discover''' button


[[File:Add Device-2010-07-01 11.25.23.png]]
[[File:Add Device-2010-07-01 11.25.23.png]]

Revision as of 08:29, 1 July 2010

Adding a new device

To add a new device to The Dude, you can either use the Discovery interface, in which case the device will automatically be added with no settings asked from you, or you can add a device manually, by clicking the Add item button above the Map window.

Once you click the Add Item button, you can then add a new device by clicking anywhere on the Map. The New device window will be opened:

Add Device-2010-07-01 11.18.59.png

You will then need to provide the following information:

  • Address - The IP or DNS name of the device you are about to add. Must be reachable from the Dude server
  • Username - Username for using tools such as Winbox (in case it's RouterOS), FTP, Telnet etc.
  • Password - Password for the same
  • Secure mode - Whether to use Secure mode when connecting to a RouterOS device. Uses TLS connection.
  • RouterOS - Whether this device is running RouterOS. Decides whether to show RouterOS specific configuration options

After clicking Next you will be asked to select which services you wish to be monitored on the newly created device. It is also possible to scan for services with the Discover button

Add Device-2010-07-01 11.25.23.png

After clicking Finish, the device will show up in the Map window and also in the Devices list. You can now double click it to open it's settings. It's also possible to right-click it and select Settings.

Device settings

192.168.88.1 - Device-2010-06-30 13.40.03.png