Difference between revisions of "Manual:The Dude v6/The dude server on VM CHR"

From MikroTik Wiki
Jump to: navigation, search
Line 1: Line 1:
Work in progress...
 
 
---
 
 
 
1. Install CHR on one of supported hypervisors as VM. Detailed instructions can be found in this wiki article:
 
1. Install CHR on one of supported hypervisors as VM. Detailed instructions can be found in this wiki article:
 
[[Manual:CHR|CHR]]
 
[[Manual:CHR|CHR]]
  
2. Download The Dude server package and Windows Client application from MikroTik homepage download section:
+
2. Download The Dude Windows Client application from MikroTik homepage download section:
 
[http://www.mikrotik.com/download link]
 
[http://www.mikrotik.com/download link]
  
* Both x86 and CHR server package can be used for CHR host.
+
3. Check that server is running or if necessary enable it.  
 
 
3. Upload this package to CHR host via (Winbox, Webfig, ftp) and reboot the VM to install the package.
 
 
 
4. Check that server is running or if necessary enable it.  
 
  
 
* Check dude status with command:
 
* Check dude status with command:
Line 31: Line 23:
 
</pre>
 
</pre>
  
5. Install The Dude client on your system and connect to VM ip address with default login credentials: Admin and empty password field.
+
4. Install The Dude client on your system and connect to VM ip address with the same credentials that you use for ROS virtual machine.
  
 
6. Check what to do next: [[Manual:The_Dude|Dude manual]]
 
6. Check what to do next: [[Manual:The_Dude|Dude manual]]

Revision as of 12:32, 14 September 2016

1. Install CHR on one of supported hypervisors as VM. Detailed instructions can be found in this wiki article: CHR

2. Download The Dude Windows Client application from MikroTik homepage download section: link

3. Check that server is running or if necessary enable it.

  • Check dude status with command:
/dude print
  • To enable or disable the dude server:
/dude set enabled=(yes/no)
  • Example on what you should see.
[admin@MirkoTik] > dude print
         enabled: yes
  data-directory: dude
          status: running

4. Install The Dude client on your system and connect to VM ip address with the same credentials that you use for ROS virtual machine.

6. Check what to do next: Dude manual