Difference between revisions of "Manual:Tools/IP-Scan"

From MikroTik Wiki
Jump to: navigation, search
(How to use)
m (How to use)
 
Line 62: Line 62:
 
==How to use==
 
==How to use==
  
When using IP scan tool user must choose what it wants to scan for:
+
When using IP scan tool user must choose what they want to scan for:
 
* certain IPv4 prefix
 
* certain IPv4 prefix
 
: tool will attempt to scan all the addreses or address set in address.
 
: tool will attempt to scan all the addreses or address set in address.

Latest revision as of 14:19, 28 October 2019

Summary

Sub-menu: /tool ip-scan
Standards:


IP Scan tool allows user to scan network based on some network prefix or by setting interface to listen to. Either way tool collects certain data from the network.

Properties

Property Description
address (string; Default: ) IP address of network device.
mac-address (string; Default: ) MAC address of network device.
time (integer in ms; Default: ) response time of seen network device when found
DNS (string; Default: ) DNS name of network device
SNMP (string; Default: ) SNMP name of the device
NET-BIOS (string; Default: ) NET-BIOS name of device if advertised by device

How to use

When using IP scan tool user must choose what they want to scan for:

  • certain IPv4 prefix
tool will attempt to scan all the addreses or address set in address.
  • interface of the router
tool will attempt to listen to packets that are "passing by" and attempt to compile results when something is found


There is a possibility to set both but then results may be inconclusive


[ Top | Back to Content ]