Manual:VLANs on Wireless

From MikroTik Wiki
Jump to navigation Jump to search


Summary

abc.

Example 1

  • R1
/interface vlan
add interface=ether1 name=vlan110 vlan-id=110
add interface=ether1 name=vlan220 vlan-id=220

/ip address
add address=192.168.1.1/24 interface=vlan110 network=192.168.1.0
add address=172.168.1.1/24 interface=vlan220 network=172.168.1.0
  • R2
/interface vlan
add interface=ether1 name=vlan110-ether1 vlan-id=110
add interface=ether1 name=vlan220-ether1 vlan-id=220

/interface bridge
add name=bridge-vlan110
add name=vlan220-bridge

/interface bridge port
add bridge=bridge-vlan110 interface=vlan110-ether1
add bridge=bridge-vlan110 interface=wlan1
add bridge=vlan220-bridge interface=vlan220-ether1
add bridge=vlan220-bridge interface=wlan2

/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=vlan110 supplicant-identity="" wpa2-pre-shared-key=passwordvlan110
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=vlan220 supplicant-identity="" wpa2-pre-shared-key=passwordvlan220

interface wireless
set [ find default-name=wlan1 ] disabled=no mode=ap-bridge security-profile=vlan110 ssid=vlan110 vlan-id=110 wireless-protocol=802.11
add disabled=no keepalive-frames=disabled mac-address=4E:5E:0C:78:CC:37 master-interface=wlan1 multicast-buffering=disabled name=wlan2 security-profile=vlan220 ssid=vlan220 vlan-id=220 wds-cost-range=0 wds-default-cost=0

  • R3
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=vlan110 supplicant-identity="" wpa2-pre-shared-key=passwordvlan110
/interface wireless
set [ find default-name=wlan1 ] disabled=no security-profile=vlan110 wireless-protocol=802.11
/ip dhcp-client
add default-route-distance=0 dhcp-options=hostname,clientid disabled=no interface=wlan1
  • R4
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=vlan220 supplicant-identity="" wpa2-pre-shared-key=passwordvlan220
/interface wireless
set [ find default-name=wlan1 ] disabled=no security-profile=vlan220 wireless-protocol=802.11
/ip dhcp-client
add default-route-distance=0 dhcp-options=hostname,clientid disabled=no interface=wlan1

Example 2

[ Top | Back to Content ]