Manual:VLANs on Wireless

From MikroTik Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


Summary

abc.

Example 1

  • R1
/interface vlan
add interface=ether1 name=vlan110 vlan-id=110
add interface=ether1 name=vlan220 vlan-id=220

/ip address
add address=192.168.1.1/24 interface=vlan110 network=192.168.1.0
add address=172.168.1.1/24 interface=vlan220 network=172.168.1.0
  • R2
/interface vlan
add interface=ether1 name=vlan110-ether1 vlan-id=110
add interface=ether1 name=vlan220-ether1 vlan-id=220

/interface bridge
add name=bridge-vlan110
add name=vlan220-bridge

/interface bridge port
add bridge=bridge-vlan110 interface=vlan110-ether1
add bridge=bridge-vlan110 interface=wlan1
add bridge=vlan220-bridge interface=vlan220-ether1
add bridge=vlan220-bridge interface=wlan2

/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=vlan110 supplicant-identity="" wpa2-pre-shared-key=passwordvlan110
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=vlan220 supplicant-identity="" wpa2-pre-shared-key=passwordvlan220

interface wireless
set [ find default-name=wlan1 ] disabled=no mode=ap-bridge security-profile=vlan110 ssid=vlan110 vlan-id=110 wireless-protocol=802.11
add disabled=no keepalive-frames=disabled mac-address=4E:5E:0C:78:CC:37 master-interface=wlan1 multicast-buffering=disabled name=wlan2 security-profile=vlan220 ssid=vlan220 vlan-id=220 wds-cost-range=0 wds-default-cost=0

  • R3
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=vlan110 supplicant-identity="" wpa2-pre-shared-key=passwordvlan110
/interface wireless
set [ find default-name=wlan1 ] disabled=no security-profile=vlan110 wireless-protocol=802.11
/ip dhcp-client
add default-route-distance=0 dhcp-options=hostname,clientid disabled=no interface=wlan1
  • R4
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=vlan220 supplicant-identity="" wpa2-pre-shared-key=passwordvlan220
/interface wireless
set [ find default-name=wlan1 ] disabled=no security-profile=vlan220 wireless-protocol=802.11
/ip dhcp-client
add default-route-distance=0 dhcp-options=hostname,clientid disabled=no interface=wlan1

Example 2

[ Top | Back to Content ]