Manual:VLANs on Wireless

From MikroTik Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


Summary

abc.

Example 1

Router1 configuration

  • Add necessary VLAN interfaces on ethernet interface to make it as a VLAN trunk port. Add ip addresses on VLAN interfaces.
[admin@R1] >
/interface vlan
add interface=ether1 name=vlan110 vlan-id=110
add interface=ether1 name=vlan220 vlan-id=220

/ip address
add address=192.168.1.1/24 interface=vlan110 network=192.168.1.0
add address=172.168.1.1/24 interface=vlan220 network=172.168.1.0

Router2 configuration

  • Add VirtualAP under wlan1 interface. ( Also create wireless security-profiles for wlan1 and wlan2)
[admin@R2] >
/interface wireless
set [ find default-name=wlan1 ] disabled=no mode=ap-bridge security-profile=vlan110 ssid=vlan110 vlan-id=110 wireless-protocol=802.11
add disabled=no keepalive-frames=disabled master-interface=wlan1 multicast-buffering=disabled name=wlan2 \
    security-profile=vlan220 ssid=vlan220 vlan-id=220 wds-cost-range=0 wds-default-cost=0
  • Add necessary VLAN interfaces on ethernet interface to make it as a VLAN trunk port.
  • Add bridges for each VLAN.
  • Add VLAN interfaces to their corresponding bridges and wireless interfaces to each bridge.
[admin@R2] >
/interface vlan
add interface=ether1 name=vlan110-ether1 vlan-id=110
add interface=ether1 name=vlan220-ether1 vlan-id=220

/interface bridge
add name=bridge-vlan110
add name=vlan220-bridge

/interface bridge port
add bridge=bridge-vlan110 interface=vlan110-ether1
add bridge=bridge-vlan110 interface=wlan1
add bridge=vlan220-bridge interface=vlan220-ether1
add bridge=vlan220-bridge interface=wlan2

Router3 configuration

  • Add ip address on wlan1 interface.
  • Create wireless security-profile compatible with R2 wlan1.
[admin@R3] >
/ip address
add address=192.168.1.3/24 interface=wlan1 network=192.168.1.0

/interface wireless
set [ find default-name=wlan1 ] disabled=no security-profile=vlan110 wireless-protocol=802.11

Router4 configuration

  • Add ip address on wlan1 interface.
  • Create wireless security-profile compatible with R2 wlan2.
[admin@R4] >
/ip address
add address=172.168.1.4/24 interface=wlan1 network=192.168.1.0

/interface wireless
set [ find default-name=wlan1 ] disabled=no security-profile=vlan220 wireless-protocol=802.11

Example 2

[ Top | Back to Content ]

Retrieved from "https://wiki.mikrotik.com/index.php?title=Manual:VLANs_on_Wireless&oldid=28972"