Manual:Woobm

From MikroTik Wiki
Revision as of 10:22, 20 July 2017 by Antonsb (talk | contribs) (Created page with "__TOC__ ===Summary=== Woobm-USB (Wireless out of band management) is USB device, that provides Serial connection over wireless bridge. Connect Woobm-USB USB device to your...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Summary

Woobm-USB (Wireless out of band management) is USB device, that provides Serial connection over wireless bridge. Connect Woobm-USB USB device to your MikroTik, Linux or other device and configure it wirelessly without need of any serial cables as well as provides CLI configuration possibility to laptops without serial port, mobile devices and tablets. Woobm-USB has built in webpage for easy access and configuration. Device supports Access Point and Client modes.

First start up

Connect your Woobm-USB to USB port, open wireless network with SSID: WoobmAP will be created. Connect to device and open devices IP address in web browser. Default Woobm-USB IP is 192.168.4.1

Home

Web interface default page is "Home" From home page it is possible to connect and configure neighbour devices (MikroTik devices from same wireless network)

Terminal

By pressing Terminal, Woobm-USB will try to emulate USB serial interface. On successful tempt "WS connection successful" message will appear above terminal window. You can enter commands from keyboard or use key buttons to send out commands through USB serial interface. Show keyboard will bring up keyboard on mobile devices. !!! Only one USB terminal may be emulated