Difference between revisions of "MikroTik SFP module compatibility table"

From MikroTik Wiki
Jump to navigation Jump to search
(added RB3011 to the tables.)
(Added explanation on how to get 1G links working on SFP+ interfaces.)
Line 1: Line 1:


This document clarifies compatibility between MikroTik made SFP modules and MikroTik RouterBOARD hardware.
== This document clarifies compatibility between MikroTik made SFP modules and MikroTik RouterBOARD hardware ==


{| border="1" class="wikitable collapsible sortable" style="text-align: center"
{| border="1" class="wikitable collapsible sortable" style="text-align: center"
Line 218: Line 218:
{{ Warning | Proper support for S-RJ01 modules on CCR1072-1G-8S+ is enabled only staring with v6.34rc software builds. }}
{{ Warning | Proper support for S-RJ01 modules on CCR1072-1G-8S+ is enabled only staring with v6.34rc software builds. }}


=== S-RJ01 ===
== S-RJ01 ==


Table that states in what link rates if mounted in specific MikroTik devices S-RJ01 module will be able to work.
Table that states in what link rates if mounted in specific MikroTik devices S-RJ01 module will be able to work.
Line 312: Line 312:
* CCR1009: SFP+/SFP
* CCR1009: SFP+/SFP


{{ Note | All results taken from test scenarios where SFP or SFPplus interface is configured in auto-negation enabled and devices version no lower than RouterOS v6.32 }}
== SFP+ interface compatibility settings with 1G links ==
 
For MikroTik devices with SFP+ interface that support both 10G and 1G link rate following settings are needed to be set on both linked devices for required interfaces. In order to get them working in 1G link rate.
 
* auto-negation disabled
* port speed 1G
* FD
 
Devices which SFP+ ports support 1G links:
 
* CCR1072-1G-8S+    - All SFP+ interfaces can be used in 1G mode if required.
* CCR1036-8G-2S+    - All SFP+ interfaces can be used in 1G mode if required.
* CCR1009-8G-1S-1S+ - All SFP+ interfaces can be used in 1G mode if required.
* CRS226-24G-2S+    - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.
* CRS210-8G-2S+    - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.
 
Devices which SFP+ interfaces can be used only for 10G links:
 
* CCR1016-12S-1S+
* CRS212-1G-10S-1S+

Revision as of 10:00, 30 December 2015

This document clarifies compatibility between MikroTik made SFP modules and MikroTik RouterBOARD hardware

Model S-GPON-ONU S-RJ01 S-85DLC05D S-31DLC20D S-3553LC20D S+85DLC03D S+31DLC10D S+2332LC10D SFP+ 1m/3m DAC
CCR1072-1G-8S+ + + + + + + + + +
CCR1036-12G-4S + + + + + + + + +
CCR1036-8G-2S+ + + + + + + + + +
CCR1016-12S-1S+ + * + * + * + * + * + + + +
CCR1009-8G-1S-1S+ + + + + + + + + +
CRS125-24G-1S + + + + + + + + +
CRS226-24G-2S+ + * - + * + * + * + + + +
CRS212-1G-10S-1S+ + * + * + * + * + * + + + +
CRS210-8G-2S+ + * - + * + * + * + + + +
CRS112-8G-4S + + + + + + + + +
CRS109-8G-1S + + + + + + + + +
RB3011 + + + + + + + + +
RB2011 + + + + + + + + +
RB260 + + + + + + + + +
RB922/921 + + + + + + + + +
RB953GS + + + + + + + + +
FTC + + + + + + + + +
Legend:
Color codes: Not supported Check notes below


  • NOTES:
    • CCR1016-12S-1S+ / CRS212-1G-10S-1S+ -- SFP+1 interface does not work on any other link speed than 10G (does not support 1.25G fiber optic transceivers)
    • CRS226 / CRS210 -- Only SFP+1 interface supports SFP 1.25G fiber optic transceivers, SFP+2 works only with 10G transceivers/links.


Icon-warn.png

Warning: Proper support for S-RJ01 modules on CCR1072-1G-8S+ is enabled only staring with v6.34rc software builds.


S-RJ01

Table that states in what link rates if mounted in specific MikroTik devices S-RJ01 module will be able to work.

Model 1000 100 10
RB3011 + + +
RB922 + + +
RB921 + + +
RB953 +/+ +/- +/-
RB2011 + - -
FTC + - -
CRS112 + + +
CRS125/CRS109 + + +
CRS212 + + +
CRS226/CRS210 - - -
CCR1009 +/+ +/+ +/+
CCR1016-12S-1S+ + + +
CCR1036-12G-4S + + +
CCR1036-8G-2S+ + + +
CCR1072-1G-8S+ + + +

Notes:

  • Rate works fine: +
  • Rate does not work: -
  • RB953: SFP2/SFP1
  • CCR1009: SFP+/SFP

SFP+ interface compatibility settings with 1G links

For MikroTik devices with SFP+ interface that support both 10G and 1G link rate following settings are needed to be set on both linked devices for required interfaces. In order to get them working in 1G link rate.

  • auto-negation disabled
  • port speed 1G
  • FD

Devices which SFP+ ports support 1G links:

  • CCR1072-1G-8S+ - All SFP+ interfaces can be used in 1G mode if required.
  • CCR1036-8G-2S+ - All SFP+ interfaces can be used in 1G mode if required.
  • CCR1009-8G-1S-1S+ - All SFP+ interfaces can be used in 1G mode if required.
  • CRS226-24G-2S+ - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.
  • CRS210-8G-2S+ - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.

Devices which SFP+ interfaces can be used only for 10G links:

  • CCR1016-12S-1S+
  • CRS212-1G-10S-1S+