MikroTik SFP module compatibility table: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
m (→‎S-RJ01: fixed compatibility in recent RouterOS versions)
(11 intermediate revisions by 2 users not shown)
Line 9: Line 9:
|  nowrap style="background-color: #CCC;* " | <b>S-31DLC20D</b>
|  nowrap style="background-color: #CCC;* " | <b>S-31DLC20D</b>
|  nowrap style="background-color: #CCC;* " | <b>S-3553LC20D</b>
|  nowrap style="background-color: #CCC;* " | <b>S-3553LC20D</b>
|  nowrap style="background-color: #CCC;* " | <b>S-55DLC80D</b>
|  nowrap style="background-color: #CCC;* " | <b>S-4554LC80D</b>
|  nowrap style="background-color: #CCC;* " | <b>S+85DLC03D</b>
|  nowrap style="background-color: #CCC;* " | <b>S+85DLC03D</b>
|  nowrap style="background-color: #CCC;* " | <b>S+31DLC10D</b>
|  nowrap style="background-color: #CCC;* " | <b>S+31DLC10D</b>
Line 28: Line 30:
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1036-12G-4S
|  style="background-color: #CCC;font-weight: bold;" | CCR1036-12G-4S
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;" |  <b>-</b>
|  style="background-color: #F99;" |  <b>-</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 43: Line 50:
|-  
|-  
|  style="background-color: #CCC;font-weight: bold;" | CCR1036-8G-2S+
|  style="background-color: #CCC;font-weight: bold;" | CCR1036-8G-2S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 58: Line 67:
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
Line 71: Line 82:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;" |  <b>-</b>
|  style="background-color: #F99;" |  <b>-</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 82: Line 95:
|-   
|-   
|  style="background-color: #CCC;font-weight: bold;" | CCR1009-8G-1S-1S+
|  style="background-color: #CCC;font-weight: bold;" | CCR1009-8G-1S-1S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 95: Line 110:
|-  
|-  
|  style="background-color: #CCC;font-weight: bold;" | CCR1009-7G-1C-1S+
|  style="background-color: #CCC;font-weight: bold;" | CCR1009-7G-1C-1S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 110: Line 127:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;" |  <b>-</b>
|  style="background-color: #F99;" |  <b>-</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 121: Line 140:
|-  
|-  
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS305-1G-4S+
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS305-1G-4S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 136: Line 157:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">5</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">5</small></b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS312-4C+8XG
|  style="background-color: #F99;" |  <b>-</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS326-24S+2Q+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 147: Line 200:
|-  
|-  
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS326-24G-2S+
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS326-24G-2S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 162: Line 217:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">3</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">3</small></b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 173: Line 230:
|-  
|-  
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS328-4C-20S-4S+
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS328-4C-20S-4S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 186: Line 245:
|-  
|-  
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS328-24P-4S+
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS328-24P-4S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 201: Line 262:
|  style="background-color: #F99;" |  <b>-</b>
|  style="background-color: #F99;" |  <b>-</b>
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
Line 214: Line 277:
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
Line 227: Line 292:
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
Line 240: Line 307:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 253: Line 322:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 266: Line 337:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 277: Line 350:
|-  
|-  
|  style="background-color: #CCC;font-weight: bold;" | RB4011
|  style="background-color: #CCC;font-weight: bold;" | RB4011
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 292: Line 367:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 305: Line 382:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 318: Line 397:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 331: Line 412:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 344: Line 427:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 357: Line 442:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 370: Line 457:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 383: Line 472:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 396: Line 487:
|  <b>+</b>
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
Line 422: Line 515:
# <b> RB4011 </b> --  Only active Direct Attach Cables (MikroTik S+AO0005) are supported. Passive DAC (MikroTik S+DA0001/S+DA0003) are not supported.
# <b> RB4011 </b> --  Only active Direct Attach Cables (MikroTik S+AO0005) are supported. Passive DAC (MikroTik S+DA0001/S+DA0003) are not supported.
# <b> CSS/CRS309-1G-8S+ </b> --  8x S+RJ10 are supported if PoE-in Voltage >30V. Up 4x S+RJ10 are supported when PoE-in Voltage = 24V.
# <b> CSS/CRS309-1G-8S+ </b> --  8x S+RJ10 are supported if PoE-in Voltage >30V. Up 4x S+RJ10 are supported when PoE-in Voltage = 24V.
 
{{note | <b>CRS326-24S+2Q+ </b>-- supports <b>Q+DA0001</b>, <b>Q+85MP01D</b> and <b>Q+BC0003-S+</b> modules. }}
 
{{ Warning | Proper support for S-RJ01 modules on CCR1072-1G-8S+ is enabled only staring with v6.34rc software builds. }}


== S-RJ01 ==
== S-RJ01 ==
Line 575: Line 666:
* CCR1009: SFP+/SFP
* CCR1009: SFP+/SFP


== S+RJ10 ==
== 10 Gigabit Ethernet ==
 
====S+RJ10====


Use these modules only in 10G SFP+ ports with auto-negotiation enabled, forced link speeds are not supported. They will negotiate to correct duplex and highest possible rate.
Use these modules only in 10G SFP+ ports with auto-negotiation enabled, forced link speeds are not supported. They will negotiate to correct duplex and highest possible rate.
Line 621: Line 714:
| 30m
| 30m
|}
|}
{{ Note| Negotiated speed highly depends on quality and length of the cables that are used. }}
The new revision of S+RJ10 now supports jumbo frames up to 10218 bytes at link speed 2.5Gbps, 5Gbps and 10Gbps.
{| border="1" class="wikitable collapsible sortable" style="text-align: center"
! style="background-color: #CCC;font-weight: bold;" | Link Speed
! style="background-color: #CCC;font-weight: bold;" | Max MTU
|-
|  10Gbps
| 10218
|-
|  5Gbps
| 10218
|-
|  2.5Gbps
| 10218
|-
|  1000Mbps
| 1504
|-
|  100Mbps
| 1504
|-
|  10Mbps
| 1504
|}
====CRS312-4C+8XG====
10GE ports maximum supported cable length.
{| border="1" class="wikitable collapsible sortable" style="text-align: center"
! style="background-color: #CCC;font-weight: bold;" | Speed
! style="background-color: #CCC;font-weight: bold;" | Cable type
! style="background-color: #CCC;font-weight: bold;" | 10 Gigabit Ethernet ports
|-
|  10BASE-T
| Cat5e/6
| 100m
|-
|  100BASE-T
| Cat5e/6
| 100m
|-
|  1000BASE-T
| Cat5e/6
| 100m
|-
|  2.5GBASE-T
| Cat5e/6
| 100m
|-
|  5GBASE-T
| Cat5e/6
| 100m
|-
|  10GBASE-T
| Cat6/7
| 30m
|}
{{ Note | Negotiated speed highly depends on quality and length of the cables that are used. }}
{{ Warning | 10GE ports doesn't support Half duplex mode with forced link speeds. }}


== SFP+ interface compatibility settings with SFP optical transceivers ==
== SFP+ interface compatibility settings with SFP optical transceivers ==
Line 655: Line 810:
* CCR1009-7G-1C-1S+ (combo1-sfp)
* CCR1009-7G-1C-1S+ (combo1-sfp)
* CRS106-1C-5S (combo1-sfp)
* CRS106-1C-5S (combo1-sfp)
* CRS328-4C-20S-4S+ (combo1-sfp; combo2-sfp; combo3-sfp; combo4-sfp)
* CRS328-4C-20S-4S+ (combo1-sfp; combo2-sfp; combo3-sfp; combo4-sfp), (SFP1-SFP20 also supports 100M Fiber links)
 
== QSFP+ interfaces compatibility settings with SFP+ ports ==
 
For MikroTik devices, the connection between the QSFP+ and SFP+ ports, using breakout cables, the following settings on QSFP+ interfaces need to be set:
 
* auto-negotiation disabled
* port speed 10G
* FD
 
{{ Note | On the SFP+ side, auto-negotiation remains enabled. }}

Revision as of 10:15, 19 September 2019

This document clarifies compatibility between MikroTik made SFP modules and MikroTik RouterBOARD hardware

Model S-RJ01 S+RJ10 S-85DLC05D S-31DLC20D S-3553LC20D S-55DLC80D S-4554LC80D S+85DLC03D S+31DLC10D S+2332LC10D SFP CWDM SFP+ 1m/3m DAC S+AO0005
CCR1072-1G-8S+ + + + + + + + + + + + + +
CCR1036-12G-4S + - + + + + + + + + + + +
CCR1036-8G-2S+ + + + + + + + + + + + + +
CCR1016-12S-1S+ + 1 + + 1 + 1 + 1 + 1 + 1 + + + + + +
CCR1009-7G-1C + - + + + + + + + + + + +
CCR1009-8G-1S-1S+ + + + + + + + + + + + + +
CCR1009-7G-1C-1S+ + + + + + + + + + + + + +
CRS125-24G-1S + - + + + + + + + + + + +
CSS/CRS305-1G-4S+ + + + + + + + + + + + + +
CSS/CRS309-1G-8S+ + + 5 + + + + + + + + + + +
CRS312-4C+8XG - + + + + + + + + + + + +
CRS326-24S+2Q+ + + + + + + + + + + + + +
CSS/CRS326-24G-2S+ + + + + + + + + + + + + +
CSS/CRS317-1G-16S+ + + 3 + + + + + + + + + + +
CSS/CRS328-4C-20S-4S+ + + + + + + + + + + + + +
CSS/CRS328-24P-4S+ + + + + + + + + + + + + +
CRS226-24G-2S+ - + + 2 + 2 + 2 + 2 + 2 + + + + + +
CRS212-1G-10S-1S+ + 1 + + 1 + 1 + 1 + 1 + 1 + + + + + +
CRS210-8G-2S+ - + + 2 + 2 + 2 + 2 + 2 + + + + + +
CRS112-8G-4S/8P-4S + - + + + + + + + + + + +
CRS109-8G-1S + - + + + + + + + + + + +
CRS106-1C-5S/FiberBox + - + + + + + + + + + + +
RB4011 + + + + + + + + + + + - 4 + 4
RB3011 + - + + + + + + + + + + +
RB2011 + - + + + + + + + + + + +
RB260 + - + + + + + + + + + + +
RB922/921 + - + + + + + + + + + + +
RB953GS + - + + + + + + + + + + +
hAP AC + - + + + + + + + + + + +
hEX PoE/PowerBox Pro + - + + + + + + + + + + +
hEX S + - + + + + + + + + + + +
FTC + - + + + + + + + + + + +
Legend
Color codes: Not supported Check notes below


NOTES:

  1. CCR1016-12S-1S+ / CRS212-1G-10S-1S+ -- SFP+1 interface does not work on any other link speed than 10G (does not support 1.25G fiber optic transceivers)
  2. CRS226 / CRS210 -- Only SFP+1 interface supports SFP 1.25G fiber optic transceivers, SFP+2 works only with 10G transceivers/links.
  3. CSS/CRS317-1G-16S+ -- power controller supports up to 10 simultaneous S+RJ10 modules.
  4. RB4011 -- Only active Direct Attach Cables (MikroTik S+AO0005) are supported. Passive DAC (MikroTik S+DA0001/S+DA0003) are not supported.
  5. CSS/CRS309-1G-8S+ -- 8x S+RJ10 are supported if PoE-in Voltage >30V. Up 4x S+RJ10 are supported when PoE-in Voltage = 24V.
Icon-note.png

Note: CRS326-24S+2Q+ -- supports Q+DA0001, Q+85MP01D and Q+BC0003-S+ modules.


S-RJ01

Table that states in what link rates if mounted in specific MikroTik devices S-RJ01 module will be able to work. Use these modules only with auto-negotiation enabled, forced link speeds are not supported. They will negotiate to correct duplex and highest possible rate.

Model 1000 100 10
RB4011 + + +
RB3011 + + +
RB922 + + +
RB921 + + +
hAP ac + + +
hEX PoE + + +
RB953 +/+ +/- +/-
RB2011 + - -
RB260 + - -
FTC + - -
CRS106 + + +
CRS112 + + +
CRS125/CRS109 + + +
CRS212 + + +
CRS226/CRS210 - - -
CSS/CRS305-1G-4S+ + + +
CSS/CRS309-1G-8S+ + + +
CSS/CRS326-24G-2S+ + + +
CSS/CRS328-4C-20S-4S+ + + +
CSS/CRS328-24P-4S+ + + +
CSS/CRS317-1G-16S+ + + +
CCR1009 +/+ +/+ +/+
CCR1016-12S-1S+ + + +
CCR1036-12G-4S + + +
CCR1036-8G-2S+ + + +
CCR1072-1G-8S+ + + +

Notes:

  • Rate works fine: +
  • Rate does not work: -
  • RB953: SFP2/SFP1
  • CCR1009: SFP+/SFP

10 Gigabit Ethernet

S+RJ10

Use these modules only in 10G SFP+ ports with auto-negotiation enabled, forced link speeds are not supported. They will negotiate to correct duplex and highest possible rate. Be aware of S+RJ10 General Guidance.

Speed Cable type S+RJ10 to other brand S+RJ10 to S+RJ10
10BASE-T Cat5e/6 100m 100m
100BASE-T Cat5e/6 100m 100m
1000BASE-T Cat5e/6 100m 200m
2.5GBASE-T Cat5e/6 UTP 100m 170m
2.5GBASE-T Cat5e/6 STP 100m 200m
5GBASE-T Cat5e/6 100m 100m
10GBASE-T Cat6/7 30m 30m
Icon-note.png

Note: Negotiated speed highly depends on quality and length of the cables that are used.


The new revision of S+RJ10 now supports jumbo frames up to 10218 bytes at link speed 2.5Gbps, 5Gbps and 10Gbps.

Link Speed Max MTU
10Gbps 10218
5Gbps 10218
2.5Gbps 10218
1000Mbps 1504
100Mbps 1504
10Mbps 1504

CRS312-4C+8XG

10GE ports maximum supported cable length.

Speed Cable type 10 Gigabit Ethernet ports
10BASE-T Cat5e/6 100m
100BASE-T Cat5e/6 100m
1000BASE-T Cat5e/6 100m
2.5GBASE-T Cat5e/6 100m
5GBASE-T Cat5e/6 100m
10GBASE-T Cat6/7 30m
Icon-note.png

Note: Negotiated speed highly depends on quality and length of the cables that are used.


Icon-warn.png

Warning: 10GE ports doesn't support Half duplex mode with forced link speeds.


SFP+ interface compatibility settings with SFP optical transceivers

For MikroTik devices with SFP+ interface that support both 10G and 1G link rate following settings are needed to be set on both linked devices for required interfaces. These settings only relate when optical SFP transceivers are used. In order to get them working in 1G link rate, use the following configuration:

  • auto-negotiation disabled
  • port speed 1G
  • FD

Devices which SFP+ ports support 1G links:

  • CCR1072-1G-8S+ - All SFP+ interfaces can be used in 1G mode if required.
  • CCR1036-8G-2S+ - All SFP+ interfaces can be used in 1G mode if required.
  • CCR1009-8G-1S-1S+ - All SFP+ interfaces can be used in 1G mode if required.
  • CCR1009-7G-1C-1S+ - All SFP+ interfaces can be used in 1G mode if required.
  • CSS326-24G-2S+RM - All SFP+ interfaces can be used in 1G mode if required.
  • CRS3xx series switches - All SFP+ interfaces can be used in 1G mode if required.
  • RB4011 series - SFP+1 interface can be used in 1G mode if required.
  • CRS226-24G-2S+ - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.
  • CRS210-8G-2S+ - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.

Devices which SFP+ interfaces can be used only for 10G links:

  • CCR1016-12S-1S+
  • CRS212-1G-10S-1S+

SFP interface compatibility with 100M fiber links

Combo interface SFP part on below mentioned devices is compatible with fast ethernet fiber links.

Compatible devices:

  • CCR1009-7G-1C (combo1-sfp)
  • CCR1009-7G-1C-1S+ (combo1-sfp)
  • CRS106-1C-5S (combo1-sfp)
  • CRS328-4C-20S-4S+ (combo1-sfp; combo2-sfp; combo3-sfp; combo4-sfp), (SFP1-SFP20 also supports 100M Fiber links)

QSFP+ interfaces compatibility settings with SFP+ ports

For MikroTik devices, the connection between the QSFP+ and SFP+ ports, using breakout cables, the following settings on QSFP+ interfaces need to be set:

  • auto-negotiation disabled
  • port speed 10G
  • FD
Icon-note.png

Note: On the SFP+ side, auto-negotiation remains enabled.