MikroTik SFP module compatibility table: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
(105 intermediate revisions by 8 users not shown)
Line 1: Line 1:
== MikroTik SFP/SFP+/QSFP+ compatibility ==


== This document clarifies compatibility between MikroTik made SFP modules and MikroTik RouterBOARD hardware ==
{{ Note | Section moved to [[MikroTik wired interface compatibility]] }}


{| border="1" class="wikitable collapsible sortable" style="text-align: center"
=== 1G SFP ===
|  nowrap style="background-color: #CCC;* " | <b><u>Model</u></b>
{{ Note | Section moved to [[MikroTik wired interface compatibility#1G SFP]] }}
|  nowrap style="background-color: #CCC;* " | <b>S-RJ01</b>
|  nowrap style="background-color: #CCC;* " | <b>S+RJ10</b>
|  nowrap style="background-color: #CCC;* " | <b>S-85DLC05D</b>
|  nowrap style="background-color: #CCC;* " | <b>S-31DLC20D</b>
|  nowrap style="background-color: #CCC;* " | <b>S-3553LC20D</b>
|  nowrap style="background-color: #CCC;* " | <b>S+85DLC03D</b>
|  nowrap style="background-color: #CCC;* " | <b>S+31DLC10D</b>
|  nowrap style="background-color: #CCC;* " | <b>S+2332LC10D</b>
|  nowrap style="background-color: #CCC;* " | <b>SFP+ 1m/3m DAC</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1072-1G-8S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1036-12G-4S
|  <b>+</b>
|  style="background-color: #F99;" |  <b>-</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1036-8G-2S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1016-12S-1S+
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  <b>+</b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1009-7G-1C
|  <b>+</b>
|  style="background-color: #F99;" |  <b>-</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|- 
|  style="background-color: #CCC;font-weight: bold;" | CCR1009-8G-1S-1S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
| <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1009-7G-1C-1S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS125-24G-1S
|  <b>+</b>
|  style="background-color: #F99;" |  <b>-</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS326-24G-2S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS317-1G-16S+
|  <b>+</b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">3</small></b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS328-4C-20S-4S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CSS/CRS328-24P-4S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS226-24G-2S+
|  style="background-color: #F99;" |  <b>-</b>
|  <b>+</b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS212-1G-10S-1S+
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  <b>+</b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">1</small></b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS210-8G-2S+
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  style="background-color: #FFB;* " |  <b>+ <small style="font-size:60%;">2</small></b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS112-8G-4S/8P-4S
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS109-8G-1S
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS106-1C-5S/FiberBox
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | RB3011
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | RB2011
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | RB260
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | RB922/921
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | RB953GS
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | hAP AC
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | hEX PoE/PowerBox Pro
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | hEX S
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | FTC
|  <b>+</b>
|  style="background-color: #F99;* " |  <b> - </b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|}


{| border="1" class="wikitable collapsible sortable" style="text-align: center"
=== 10G SFP+/25G SFP28 ===
| nowrap | <b> Legend</b>
{{ Note | Section moved to [[MikroTik wired interface compatibility#10G SFP+/25G SFP28]] }}
|-
| Color codes:
| style="background-color: #F99;* " #FFB| Not supported
| style="background-color: #FFB;* " | Check notes below
|}


 
=== 40G QSFP+ ===
<b>NOTES:</b>
{{ Note | Section moved to [[MikroTik wired interface compatibility#40G QSFP+]] }}
#<b> CCR1016-12S-1S+ / CRS212-1G-10S-1S+</b> --  SFP+1 interface does not work on any other link speed than 10G (does not support 1.25G fiber optic transceivers)
# <b> CRS226 / CRS210 </b> --  Only SFP+1 interface supports SFP 1.25G fiber optic transceivers, SFP+2 works only with 10G transceivers/links.
# <b> CSS317/CRS317 </b> --  power controller supports up to 14 simultaneous S+RJ10 modules.
 
 
{{ Warning | Proper support for S-RJ01 modules on CCR1072-1G-8S+ is enabled only staring with v6.34rc software builds. }}


== S-RJ01 ==
== S-RJ01 ==
{{ Note | Section moved to [[MikroTik wired interface compatibility#S-RJ01]] }}


Table that states in what link rates if mounted in specific MikroTik devices S-RJ01 module will be able to work.
== 10 Gigabit Ethernet ==
 
{{ Note | Section moved to [[MikroTik wired interface compatibility#10 Gigabit Ethernet]] }}
{| border="1" class="wikitable collapsible sortable" style="text-align: center"
|  nowrap style="background-color: #CCC;* " | <b><u>Model</u></b>
|  nowrap style="background-color: #CCC;* " | <b>1000</b>
|  nowrap style="background-color: #CCC;* " | <b>100</b>
|  nowrap style="background-color: #CCC;* " | <b>10</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | RB3011
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | RB922
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | RB921
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | hAP ac
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | hEX PoE
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | RB953
|  <b>+/+</b>
|  <b>+/-</b>
|  <b>+/-</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | RB2011
|  <b>+</b>
|  <b>-</b>
|  <b>-</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | RB260
|  <b>+</b>
|  <b>-</b>
|  <b>-</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | FTC
|  <b>+</b>
|  <b>-</b>
|  <b>-</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS106
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS112
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS125/CRS109
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS212
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CRS226/CRS210
|  <b>-</b>
|  <b>-</b>
|  <b>-</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CSS326/CRS326
|  <b>+</b>
|  <b>-</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CSS317/CRS317
|  <b>+</b>
|  <b>-</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1009
|  <b>+/+</b>
|  <b>+/+</b>
|  <b>+/+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1016-12S-1S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1036-12G-4S
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1036-8G-2S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|  style="background-color: #CCC;font-weight: bold;" | CCR1072-1G-8S+
|  <b>+</b>
|  <b>+</b>
|  <b>+</b>
|-
|}
 
Notes:
* Rate works fine: +
* Rate does not work: -
 
* RB953: SFP2/SFP1
* CCR1009: SFP+/SFP
 
== S+RJ10 ==
 
{| border="1" class="wikitable collapsible sortable" style="text-align: center"
! style="background-color: #CCC;font-weight: bold;" | Speed
! style="background-color: #CCC;font-weight: bold;" | Cable type
! style="background-color: #CCC;font-weight: bold;" | S+RJ10 to other brand
! style="background-color: #CCC;font-weight: bold;" | S+RJ10 to S+RJ10
|-
|  10BASE-T
| Cat5e/6
| 100m
| 100m
|-
|  100BASE-T
| Cat5e/6
| 100m
| 100m
|-
|  1000BASE-T
| Cat5e/6
| 100m
| 200m
|-
|  2.5GBASE-T
| Cat5e/6 UTP
| 100m
| 170m
|-
|  2.5GBASE-T
| Cat5e/6 STP
| 100m
| 200m
|-
|  5GBASE-T
| Cat5e/6
| 100m
| 100m
|-
|  10GBASE-T
| Cat6/7
| 30m
| 30m
|}
 
 
 
== SFP+ interface compatibility settings with 1G links ==
 
For MikroTik devices with SFP+ interface that support both 10G and 1G link rate following settings are needed to be set on both linked devices for required interfaces. In order to get them working in 1G link rate.


* auto-negotiation disabled
====S+RJ10====
* port speed 1G
{{ Note | Section moved to [[MikroTik wired interface compatibility#S+RJ10]] }}
* FD


Devices which SFP+ ports support 1G links:


* CCR1072-1G-8S+    - All SFP+ interfaces can be used in 1G mode if required.
====CRS312-4C+8XG====
* CCR1036-8G-2S+    - All SFP+ interfaces can be used in 1G mode if required.
{{ Note | Section moved to [[MikroTik wired interface compatibility#CRS312-4C+8XG]] }}
* CCR1009-8G-1S-1S+ - All SFP+ interfaces can be used in 1G mode if required.
* CCR1009-7G-1C-1S+ - All SFP+ interfaces can be used in 1G mode if required.
* CSS326-24G-2S+RM  - All SFP+ interfaces can be used in 1G mode if required.
* CRS226-24G-2S+    - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.
* CRS210-8G-2S+    - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.


Devices which SFP+ interfaces can be used only for 10G links:
== SFP+ interface compatibility settings with SFP optical transceivers ==
 
{{ Note | Section moved to [[MikroTik wired interface compatibility#SFP+ interface compatibility settings with SFP optical transceivers]] }}
* CCR1016-12S-1S+
* CRS212-1G-10S-1S+


== SFP interface compatibility with 100M fiber links ==
== SFP interface compatibility with 100M fiber links ==
{{ Note | Section moved to [[MikroTik wired interface compatibility#SFP interface compatibility with 100M fiber links]] }}


Combo interface SFP part on below mentioned devices is compatible with [https://en.wikipedia.org/wiki/Fast_Ethernet#Fiber_optics fast ethernet fiber] links.
== QSFP+ interfaces compatibility settings with SFP+ ports ==
 
{{ Note | Section moved to [[MikroTik wired interface compatibility#QSFP+ interfaces compatibility settings with SFP+ ports]] }}
Compatible devices:
* CCR1009-7G-1C
* CCR1009-7G-1C-1S+
* CRS106-1C-5S
 
== S-GPON-ONU ==
 
Confirmed OLT device manufacturers that work with this GPON ONT module.
 
* ZTE
* Huawei
* Alcatel-Lucent
* Calix
* Adtran
* BDCOM
 
Some basic configuration examples for quick test:
 
* Huawei
* ZTE
* Adtran
 
Article: [[GPON_module_basic_test_examples | link ]]
 
== OSPF over S-GPON-ONU ==
 
To get OSPF network information forwarding working over GPON-ONU module [https://wiki.mikrotik.com/wiki/Manual:OSPF-examples#NBMA_networks NBMA network ] configuration must be used.

Revision as of 10:26, 18 May 2021

MikroTik SFP/SFP+/QSFP+ compatibility


1G SFP


10G SFP+/25G SFP28


40G QSFP+


S-RJ01


10 Gigabit Ethernet


S+RJ10



CRS312-4C+8XG


SFP+ interface compatibility settings with SFP optical transceivers


SFP interface compatibility with 100M fiber links


QSFP+ interfaces compatibility settings with SFP+ ports