Difference between revisions of "MikroTik SFP module compatibility table"

From MikroTik Wiki
Jump to: navigation, search
Line 163: Line 163:
  
  
{{ Note |
+
* <b>NOTES:</b>
* CCR1009-8G-1S-1S+ - SFP+1 interface does not support rj45 SFP modules. SFP1 interface however will work just fine with this type of  
+
** <b>CCR1009-8G-1S-1S+</b> -SFP+1 interface does not support rj45 SFP modules. SFP1 interface however will work just fine with this type of transceiver.
  transceiver. }}
+
** <b> CCR1016-12S-1S+ / CRS212-1G-10S-1S+</b> -SFP+1 interface does not work on any other link speed than 10G.
{{ Note |  * CCR1016-12S-1S+ / CRS212-1G-10S-1S+ - SFP+1 interface does not work on any other link speed than 10G. }}
+
** <b> CRS226 / CRS210 </b> -- Only SFP+1 interface supports SFP 1.25G transveicers, SFP+2 works only with 10G transceivers/links.
{{ Note |  * CRS226 / CRS210 - Only SFP+1 interface supports SFP 1.25G transveicers, SFP+2 works only with 10G transceivers/links. }}
 

Revision as of 16:55, 6 February 2015

This document clarifies compatibility between MikroTik made SFP modules and MikroTik RouterBOARD hardware.

Model S-RJ01 S-85DLC05D S-31DLC20D S-3553LC20D S+85DLC03D S+31DLC10D S+2332LC10D SFP+ 1m/3m DAC
CCR1036-12G-4S + + + + + + + +
CCR1036-8G-2S+ - + + + + + + +
CCR1016-12S-1S+ + * + * + * + * + + + +
CCR1009-8G-1S-1S+ + * + + + + + + +
CRS125-24G-1S + + + + + + + +
CRS226-24G-2S+ - + + + + + + +
CRS212-1G-10S-1S+ + * + * + * + * + + + +
CRS210-8G-2S+ - * + + + + + + +
CRS109-8G-1S + + + + + + + +
RB260GS + + + + + + + +
RB2011 + + + + + + + +
RB922/921 + + + + + + + +
RB953GS + + + + + + + +
FTC + + + + + + + +
Legend:
Color codes: Not supported Check notes below


  • NOTES:
    • CCR1009-8G-1S-1S+ -- SFP+1 interface does not support rj45 SFP modules. SFP1 interface however will work just fine with this type of transceiver.
    • CCR1016-12S-1S+ / CRS212-1G-10S-1S+ -- SFP+1 interface does not work on any other link speed than 10G.
    • CRS226 / CRS210 -- Only SFP+1 interface supports SFP 1.25G transveicers, SFP+2 works only with 10G transceivers/links.