MikroTik SFP module compatibility table

From MikroTik Wiki
Revision as of 16:11, 6 February 2015 by Krisjanis (talk | contribs)
Jump to: navigation, search

See Supported Hardware

This document clarifies compatibility between MikroTik made SFP modules and MikroTik RouterBOARD hardware.

Model S-RJ01 S-85DLC05D S-31DLC20D S-3553LC20D S+85DLC03D S+31DLC10D S+2332LC10D SFP+ 1m/3m DAC
CCR1036-12G-4S + + + + + + + +
CCR1036-8G-2S+ - + + + + + + +
CCR1016-12S-1S+ + * + * + * + * + + + +
CCR1009-8G-1S-1S+ + * + + + + + + +
CRS125-24G-1S + + + + + + + +
CRS226-24G-2S+ - + + + + + + +
CRS212-1G-10S-1S+ + * + * + * + * + + + +
CRS210-8G-2S+ - * + + + + + + +
CRS109-8G-1S + + + + + + + +
RB260GS + + + + + + + +
RB2011 + + + + + + + +
RB922/921 + + + + + + + +
RB953GS + + + + + + + +
FTC + + + + + + + +


Icon-note.png

Note: * CCR1009-8G-1S-1S+ ... SFP+1 interface does not support rj45 SFP modules. SFP1 interface however will work just fine with this type of transceiver.


Icon-note.png

Note: * CCR1016-12S-1S+ ... CRS212-1G-10S-1S+ - SFP+1 interface does not work on any other link speed than 10G.


Icon-note.png

Note: * CRS226 / CRS210 ... Only SFP+1 interface supports SFP 1.25G transveicers, SFP+2 works only with 10G transceivers/links.