MikroTik SFP module compatibility table

From MikroTik Wiki
Revision as of 13:11, 6 February 2015 by Krisjanis (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

See Supported Hardware

This document clarifies compatibility between MikroTik made SFP modules and MikroTik RouterBOARD hardware.

Model S-RJ01 S-85DLC05D S-31DLC20D S-3553LC20D S+85DLC03D S+31DLC10D S+2332LC10D SFP+ 1m/3m DAC
CCR1036-12G-4S + + + + + + + +
CCR1036-8G-2S+ - + + + + + + +
CCR1016-12S-1S+ + * + * + * + * + + + +
CCR1009-8G-1S-1S+ + * + + + + + + +
CRS125-24G-1S + + + + + + + +
CRS226-24G-2S+ - + + + + + + +
CRS212-1G-10S-1S+ + * + * + * + * + + + +
CRS210-8G-2S+ - * + + + + + + +
CRS109-8G-1S + + + + + + + +
RB260GS + + + + + + + +
RB2011 + + + + + + + +
RB922/921 + + + + + + + +
RB953GS + + + + + + + +
FTC + + + + + + + +


Icon-note.png

Note: * CCR1009-8G-1S-1S+ ... SFP+1 interface does not support rj45 SFP modules. SFP1 interface however will work just fine with this type of transceiver.


Icon-note.png

Note: * CCR1016-12S-1S+ ... CRS212-1G-10S-1S+ - SFP+1 interface does not work on any other link speed than 10G.


Icon-note.png

Note: * CRS226 / CRS210 ... Only SFP+1 interface supports SFP 1.25G transveicers, SFP+2 works only with 10G transceivers/links.