MoxaC168H dialup

From MikroTik Wiki
Revision as of 16:42, 6 May 2008 by Prash in (talk | contribs) (New page: To distribute the Internet connectivity within the campus or company township by utilizing internal EPABX connectivity network for telephone .here the internet distribution is through dial...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

To distribute the Internet connectivity within the campus or company township by utilizing internal EPABX connectivity network for telephone .here the internet distribution is through dial-up modem connectivity and using existing telephonic cable network

As its private Exchange network which gives unlimited free connectivity to users for internet .

The setup requires • PC based router with MikroTik OS , • Moxa C168H card with Octopus Cable, • Dialup Modems ( 8 Nos )

To increase more nos of connection extra Moxa card and Dialup modem is required. maximum we can connect as per the availability of PCI slots

Actually you get 2 more serial ports as available with PC

[Twnship_Internet] port>

add name=moxaA1 used-by=ppp baud-rate=115200

[Twnship_Internet] port> print

0 name=moxaA1 used-by=PPP <ppp-in1> baud-rate=115200 data-bits=8 parity=none stop-bits=1 flow-control=none

1 name=moxaA2 used-by=PPP <ppp-in2> baud-rate=115200 data-bits=8 parity=none stop-bits=1 flow-control=none

Note : the default baud-rate is 9600 , changing it to 115200 which gives faster surfing feal to the user.

[Twnship_Internet] interface ppp-server>

/add name=ppp-in1 port=moxaA1 local-address=192.168.1.1 remote-address=192.168.1.2 modem-init=at&f ring-count-1 encryption=none

[Twnship_Internet] interface ppp-server> print

Flags: X - disabled

 0   port=moxaA1 pap=yes chap=yes ms-chapv2=no local-address=192.168.1.1 remote-address=192.168.1.2 mtu=1500 mru=1500 idle-timeout=0s session-timeout=0s null-modem=no modem-init=at&f ring-count=1 port-id=0 encryption=none name=ppp-in1
 1  port=moxaA2 pap=yes chap=yes ms-chapv2=no local-address=192.168.1.1 remote-address=192.168.1.3 mtu=1500 mru=1500 idle-timeout=0s session-timeout=0s null-modem=no modem-init=at&f ring-count=2 port-id=0 encryption=none name=ppp-in2


[Twnship_Internet] ip firewall nat>

add chain=src-nat action=masquered src-address=192.168.1.0/24

User authentication

User control and accounting can be done using local user creation and accounting, or external radius, or additional user manager as a radius.