NAT Tutorial

From MikroTik Wiki
Revision as of 20:02, 23 June 2008 by Djneoplan (talk | contribs)
Jump to: navigation, search


This is a short howto explaining how to set up a full-NAT on a Mikrotik RouterOS.

This setup lets you hide your private ip from the public network. This means that in your private network you can have whatever private ip you want which is translated to the public network ip given to you by your network provider. This tutorial can be used by clients who want to connect to a network without changing the ip addressing of his LAN.


On the following example we have a wireless interface which connects to a wireless network and an ethernet interface for the local network.

Suppose you are (Private) 
Your RouterBoard's Ethernet card is (Private) 
Your RouterBoard's Wireless card is (Public) 
The Access Point You connect to is (Public) 

Nat with 1 pc.jpg

  • Firstly we set the ip addresses

Mikrotik nat howto01.jpg

Mikrotik nat howto02.jpg

  • Secondly we fix the static routes so that we can access the network

Mikrotik nat howto03.jpg

Mikrotik nat howto04.jpg

  • We start building the NAT as followed

Mikrotik nat howto05.jpg

Mikrotik nat howto06.jpg


Mikrotik nat howto07.jpg

Mikrotik nat howto08.jpg


Mikrotik nat howto09.jpg

Mikrotik nat howto10.jpg

  • NAT Completed!

Mikrotik nat howto11.jpg