PPPOE Server

From MikroTik Wiki
Revision as of 14:38, 10 October 2008 by Adjoneidi (talk | contribs) (New page: you can use this configuration for PPPoe server that users get public ip. if range of public ip is 192.168.1.0/24 and ip of router is 192.168.1.4 and ip of gateway is 192.168.1.1 first for...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

you can use this configuration for PPPoe server that users get public ip. if range of public ip is 192.168.1.0/24 and ip of router is 192.168.1.4 and ip of gateway is 192.168.1.1 first for router set this ip File:Http://wiki.mikrotik.com/images/1/14/PPPoe-ip.jpg then write 1 route for describe gateway: File:Http://wiki.mikrotik.com/images/d/d5/PPPoe-route.jpg NOTE: is better in interface change ARP condition to proxy-arp File:Http://wiki.mikrotik.com/images/5/55/Pppoe-arp.jpg then for user you can provide ip. we provide 245 ip for users in IP>POOL: File:Http://wiki.mikrotik.com/images/f/f6/Pppoe-pool.jpg now for setup PPPOE server look for PPP and in Profiles and click on add bottom: File:Http://wiki.mikrotik.com/images/4/4a/Pppoe-profile.jpg well now router for made PPPoE server is ready in PPP click PPPoE servers tab and click add bottom: File:Http://wiki.mikrotik.com/images/f/fa/PPPoe-server.jpg for make username and passoword in light scale in Secrets ta in PPP click on add bottom : File:Http://wiki.mikrotik.com/images/b/b7/Pppoe-secret.jpg for better manage on users traffic you can apply radius server and for bandwidth use queue.

Retrieved from "https://wiki.mikrotik.com/index.php?title=PPPOE_Server&oldid=9025"