PPPOE Server

you can use this configuration for PPPoe server that users get public ip. if range of public ip is 192.168.1.0/24 and ip of router is 192.168.1.4 and ip of gateway is 192.168.1.1 first for router set this ip then write 1 route for describe gateway: NOTE: is better in interface change ARP condition to proxy-arp then for user you can provide ip. we provide 245 ip for users in IP>POOL: now for setup PPPOE server look for PPP and in Profiles and click on add bottom: well now router for made PPPoE server is ready in PPP click PPPoE servers tab and click add bottom: for make username and passoword in light scale in Secrets ta in PPP click on add bottom : for better manage on users traffic you can apply radius server and for bandwidth use queue.