PPPoE With 2Wire Router
From MikroTik Wiki
To change a BT 2Wire into a Modem and establish PPPoE on the Mikrotik:
- 1. In the 2wire, goto Broadband>link config> change parameters to Bridged LLC, untick PVM, and connection type set to Direct IP or DHCP, disable routing.
- 2. In MT, go to PPP>new interface>PPPOE client, add ISP authentication (AC name was "BT_ADSL").
- 3. Go to IP>addresses>add address>put your public static IP address and assign it to newly created PPPOE client interface.
- 4. Delete your current DHCP Client.
- 5. Change your src-nat rule to PPPOE Client interface.
- 6. cross your fingers.
