PTP Links - A Step By Step Guide

From MikroTik Wiki
Jump to: navigation, search

AP Bridge & Station WDS

This article will show a very quick overview for beginners on setting up a Point to Point link in Router OS Winbox graphical configuration tool.

Requirements :-

1. 2 Nos of Mikrotik Metal 5SHPN. 2. 30 dbi Grid antenna make KBT.

Instructions


Start by opening the Mikroitk Metal 5SHPN through Winbox. then You will see WLAN listed here, they might be disabled - to turn them on, click on the blue Enable button. Make sure that the interface is configured and the antennas are connected before you enable an interface. this configure for only AP device. 1.JPG


To configure an interface, double-click on WLAN, and the config window will appear. To set the device as an Bridge mode, choose "AP bridge" mode. You can also set other things, like the desired band, frequency, SSID and the security profile. also chose nv2 protocol for both end for better throughput. 13.JPG


Then add a bridge and add ether1 & wlan1 in bridge port. also add both end device. 15.JPG 16.JPG

Then create WDS in AP end device. 18.JPG