Manual:Packet Flow: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
Line 76: Line 76:


[[Image:hotspot_in.jpg|Hotspot In|100px]] - allow to capture traffic witch otherwise would be discarded by connection tracking - this way our Hotspot feature are able to provide connectivity even if networks settings are in complete mess
[[Image:hotspot_in.jpg|Hotspot In|100px]] - allow to capture traffic witch otherwise would be discarded by connection tracking - this way our Hotspot feature are able to provide connectivity even if networks settings are in complete mess
[[Image:Bridge Desicion.jpg|Bridge Decision|100px]]




Line 94: Line 98:
[[Image:out_interface_bridge.jpg|Out-interface Bridge|100px]] - check if the ''actual output interface'' is a port for bridge OR  checks if ''output interface'' is bridge
[[Image:out_interface_bridge.jpg|Out-interface Bridge|100px]] - check if the ''actual output interface'' is a port for bridge OR  checks if ''output interface'' is bridge


[[Image:Bridge Desicion.jpg|Bridge Decision|100px]] - undo all that was done by hotspot-in for the packets that is going back to client.






[[Image:Hotspot_out.jpg|Hotspot Out|100px]]
[[Image:Hotspot_out.jpg|Hotspot Out|100px]] - undo all that was done by hotspot-in for the packets that is going back to client.


==Examples==
==Examples==

Revision as of 14:31, 27 November 2008

MikroTik RouterOS is designed to be easy to operate in various aspects of network configuration. Therefore creating limitation for individual IP or natting internal clients to a public address or Hotspot configuration can be done without the knowledge about how the packets are processed in the router - you just go to corresponding menu and create necessary configuration.

However more complicated tasks, such as traffic prioritization, routing policies, where it is necessary to utilize more than one RouterOS facility, requires knowledge: How these facilities work together? What happens when and why?

To address these questions we created a packet flow diagram.

Diagram

As it was impossible to get everything in one diagram, Packet flow diagram for Mikrotik RouterOS v3.x was created in 2 parts:

  • Bridging or Layer-2 (MAC) where Routing part is simplified to one "Layer-3" box
  • Routing or Layer-3 (IP) where Bridging part is simplified to one "Bridging" box


Packet Flow in Layer-2



Packet Flow in Layer-3



Analysis

Basic Concepts

Input Interface - starting point in packets way thought the router facilities. It does not matter what interface (physical or virtual) packet is received it will start its way from here.

Output Interface - last point in packets way thought the router facilities. Just before the packet is actually sent out.

Filter Output - last point in packets way to router itself, after this packet is discarded

Filter Output - starting point for packets generated by router itself

Configurable Facilities

Each and every facilities in this section corresponds with one particular menu in RouterOS. Users are able to access those menu and configure these facilities directly


Connection Tracking - /ip firewall connection tracking

Filter Input Filter Forward Filter Output - /ip firewall filter

Source NAT Destination NAT - /ip firewall nat

Mangle Prerouting Mangle Input Mangle Forward Mangle Output Mangle Postrouting - /ip firewall mangle

Global-in HTB Global-Out HTB Interface HTB - /queue simple and /queue tree

IPSec_Policy - /ip ipsec policy

Use IP Firewall - /interface bridge settings

Bridge Forward Bridge Input Bridge Output - /interface bridge filter

Bridge Destination NAT Bridge Source NAT - /interface bridge nat


Automated processes and desicions

In-interface Bridge - check if the actual input interface is a port for bridge OR checks if input interface is bridge

Hotspot In - allow to capture traffic witch otherwise would be discarded by connection tracking - this way our Hotspot feature are able to provide connectivity even if networks settings are in complete mess


Bridge Decision


Routing Adjustment

Accounting

TTL Adjustment

Bridge Decision

IPSec_Decryption

IPSec_Encryption


Out-interface Bridge - check if the actual output interface is a port for bridge OR checks if output interface is bridge



Hotspot Out - undo all that was done by hotspot-in for the packets that is going back to client.

Examples

Example1: Bridging with use-ip-firewall=yes

Example2: Routing - from Ethernet to Ethernet interface

Example3: Routing from one Bridge interface to another

Example4: IPsec encryption and sending to the peer

Example5: IPsec data receiving and decryption