Private Management Network with Vlans Using minimial Configuration

From MikroTik Wiki
Revision as of 09:27, 8 February 2012 by Normis (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

To create a Private Management Network for the Mikrotik Devices. Also allowing Vlans to pass through the AP to the CPE's and have the CPE untag (access mode) to Customer equipment.

On Access Point

  • Ensure it's setup in AP-Bridge mode
  • Create a Bridge
  • Bind Two ports WLAN1 and Ether1
  • Your Management IP address can be on Ether1 or bridge

On CPE Station

  • Ensure it's setup in Station-Bridge mode
  • Create vlan and bind it to WLAN1
  • Create BridgevlanXX
  • Bridge Ether1 to BridgevlanXX
  • Bridge Vlan to BridgvlanXX

For the Management of this device you can leave the 192.168.88.1 on ether1. You will have to make sure your Managment ip address is on WLAN 1 (For Private Management).

Mikrotik-Simple.jpg

Created by: Dejan Dan Protich Sago Networks, LLC. dprotich_sagonet_com