Proxy on RouterBOARD's external drive
MikroTik RouterOS proxy implements different features of HTTP caching and filtering. RouterBOARD can be used to implement HTTP caching on your network. RouterBOARD uses NAND as hard drive, external drive is more recommended due to space limitation 64/128/512 MB, when HTTP caching is necessary on your network.
External drive on RouterBOARD
The list of the RouterBOARDs, where is the option to add external drive;
- RouterBOARD 5xx (532/532A - Compact Flash card slot);
- RouterBOARD 4xx (433AH - MicroSD card slot; 433UAH - MicroSD card slot; 450G - MicroSD card slot; 493AH - MicroSD card slot)
- RouterBOARD 6xx (600/600a - Compact Flash card slot);
- RouterBOARD 1000 (1000 - Compact Flash card slot);
MikroTik RouterOS proxy can be used in three modes, a) cache is not saved anywhere; b) cache is saved to RAM; c) cache is save to Hard Drive. When RouterBOARD does not have external drive, it is advised to use a) or b) method. c) is used with the RouterBOARDs, which have external drives.
Proxy with external drive
The example covers configuration, when proxy caches HTTP traffic to the external drive (CF, MicroDrive or MicroSD).
- Firstly, let's prepare external drive to save proxy cache. Plug the external drive into the RouterBOARD. Disk is recognized and shown at /store menu, run Format Disk command,
Proxy without external drive
Let's look on the proxy example, when RouterBOARD does not have external drive, proxy cache is saved to RAM or not saved anywhere.
- Enable proxy and specify information about yourself,
- Set cache to be saved to RAM by Cache On Disk=no option. Max. Cache Size=none forces proxy not to cache any files, other values for Max. Cache Size enables proxy caching to disk or RAM,
- Proxy uses own DNS to resolve webpages IP addresses, therefore DNS configuration on the router is necessary. Example uses global DNS server addresses, please use local DNS servers addresses to ensure faster DNS resolution time.
- Proxy is enabled at this point. Additional configuration is necessary for the clients browser, proxy address should be added to configuration settings on the client computer. Add NAT redirect rule to avoid mass configuration of clients browser, redirect rule will forward all clients to the proxy.
Command Line Configuration
/ip proxy set enabled=yes cache-on-disk=no max-cache-size=none /ip dns set primary-dns=22.214.171.124 secondary-dns=126.96.36.199 /ip firewall nat add chain=dstnat dst-port=80 protocol=tcp action=redirect to-ports=8080