Difference between revisions of "RouterBOARD Troubleshooting"

From MikroTik Wiki
Jump to navigation Jump to search
m (routerboard troubleshooting initial page)
 
Line 1: Line 1:
This page describes methods of testing if a RouterBOARD device has troubles.  
This page describes methods of testing if a RouterBOARD device has troubles. Before contacting support, or RMA department, please carefully try ALL of the mentioned methods:
 


== Starts, but OS doesn't load ==
== Starts, but OS doesn't load ==

Revision as of 13:16, 26 February 2007

This page describes methods of testing if a RouterBOARD device has troubles. Before contacting support, or RMA department, please carefully try ALL of the mentioned methods:

Starts, but OS doesn't load

  • Check if the baud rate of your terminal program is set correctly
  • Try using mac-telnet, or mac-winbox to connect
  • Make sure your RouterBOARD's BIOS is set to boot from NAND
  • If all else fails, hold the button next to the LEDs to load backup BIOS

No information on the console output

  • Hold the button next to the LEDs to load backup BIOS