RouterBOARD Troubleshooting

From MikroTik Wiki
Revision as of 13:15, 26 February 2007 by Normis (talk | contribs) (routerboard troubleshooting initial page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This page describes methods of testing if a RouterBOARD device has troubles.


Starts, but OS doesn't load

  • Check if the baud rate of your terminal program is set correctly
  • Try using mac-telnet, or mac-winbox to connect
  • Make sure your RouterBOARD's BIOS is set to boot from NAND
  • If all else fails, hold the button next to the LEDs to load backup BIOS

No information on the console output

  • Hold the button next to the LEDs to load backup BIOS